itsmeyo

PM'd

Same issue, contacted many times, After a few back and forth and being difficult to contact He told me to come Take it, I organized the money and right before booking flights he told me it was sold... 3 months later updates the price(lowers it) and photos on carsales. He was also bragging about being a Cover car for nismo .,,,, yet nothing under the bonnet is nismo lol.

PM sent

Looked through the whole catalog only disc that was within those requirements was an Audi RS4, so looking for alternatives at the moment but that is an option depending on cost of custom hats. And kiwi, i am after smaller discs because the regular size will not fit under my rim, and i want best of both worlds , I understand it will be harder to dispense heat with a smaller disc but the benefits outweigh the downsides.

Hey guys, A bit off an odd request, but not sure where to start my search so any help will be appreciated. I am attempting to run a larger caliper with a slightly small disc and am having difficulty finding a suitable disc, I am searching for something in the range of 360-370mm with a thickness between 32-34mm and with a pad surface area (annulus) of 70mm, these measurements are rough and i can consider discs within a couple MM of the requirements. I have looked through the entire DBA catalog and only found one disc within the requirements however it is for an Audi and would require a custom hat to be made. I believe my best option is to look at what the after market companies have to offer however finding all the details i need is not always easy, If anybody could point me in the right direction it would be greatly appreciated. Thank you

Can somebody please decode this for me BNR32 310473 KBNR32RBFS8AA thank you

Yes, they are making the brackets for us in house. I think it was about 140 a bracket, so 280 for the pair? Don't quote me on that tho.

The rear caliper does not come with the race upgrade option, at-least not with this deal. you can call and ask tho, i suspect it may be much more expensive.

Yes just call and mention this group buy to get in on the action, however group buy will close probably tomorrow or if your LUCKY Wednesday.

No problem, i just ordered mine now. I also ordering a custom bracket made up for the rear brembos to space them out to run 350mm DBA 4000, 370z discs, with same pattern as the fronts. Kit includes 2 brackets and 2 350mm DBA 4000 rotos, for $750.

image wont upload sorry https://www.google.com/search?q=cr3680&source=lnms&tbm=isch&sa=X&ei=qVw7VZKKMqPSmAXI94GAAw&ved=0CAkQ_AUoAw&biw=1439&bih=831#tbm=isch&q=alcon+cr6380&imgrc=knprGVuNz2xsgM%253A%3BsJKQGlW4vhLKIM%3Bhttp%253A%252F%252Fwww.sellholmshop.se%252Fmedia%252Fcatalog%252Fproduct%252Fcache%252F1%252Fimage%252F500x500%252F9df78eab33525d08d6e5fb8d27136e95%252Fa%252Fl%252Falcon-cr6380.jpg%3Bhttp%253A%252F%252Fwww.sellholmshop.se%252Fbromsdetaljer%252Fbromsok%252Falcon-cr6380-32-30-35-38-6-piston-radial-mount-caliper.html%3B500%3B500 Best i could do

Just an update guys, Anybody who is interested due to being a group buy the wait time on these calipers may be between 4-6 weeks. We have been offered an alternative which i think is even better, We have been offered a free upgrade to the race version of this caliper. The racing calipers are 600grams lighter than the road caliper, they have a removable bridge which makes changing pads a whole lot easier, and they come with knock back spring which helps keep constant pressure on the pads which reduces the need to pump the brake pedal when flying into a corner, and also helps reduce pad knock off. These are normally $1000 more then the regular calipers so a much larger saving then the 5%. The group buy will begin Monday and be closed by Wednesday at the latest. If you choose to jump on board just call brakes direct on 1300724943. PS the new caliper looks much nicer

yes he mentioned the fronts are the same caliper just different bracket to allow for different disc size, however he only offered the one option for the rear

i have been told they are direct bolt on with the correct bracket and the original lines should be compatible. i forgot to ask about thickness of rotor tho so not sure, but feel free to call and ask them. brackets will look something like this depending on model

GTR brake upgrade, I have been speaking to Brakes direct and have got some prices for brake upgrades with a 5% discount on 3 purchases and greater discounts with more interest Alcon 6 pot fronts 378mm with 2 piece DBA 5000 rotors normally $2997 ($2848) with current discount Alcon 6 pot fronts 365mm with 2 piece DBA 5000 rotors normally $2697 ($2562) with current discount Alcon 4 pot Rear 335mm with 2 piece DBA 5000 rotors normally $2497 ($2373) with current discount (works with standard handbrake assembly) All kits come with street brakes and can be upgraded for race pads depending on what you prefer for aprox $200 more. Greatest advantage of this kit and reason for the cheaper price is the ability to run DBA rotors instead of Alcons which would run almost double the price. The replacement cost on rotors is $385 for 365mm and $399 for 378mm each All kits come with mounting brackets and offer free delivery Australia wide. If all goes well order will be placed by the end of the month. If you are genuinely interested please send me a PM as i will be posting this on a few pages.