Jump to content
SAU Community

WMDC35

Members
  • Posts

    801
  • Joined

  • Last visited

  • Feedback

    0%

Profile Information

  • Gender
    Male

Profile Fields

  • Car(s)
    C35 Club S, IS350

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

WMDC35's Achievements

Experienced

Experienced (11/14)

  • Dedicated Rare
  • Reacting Well Rare
  • First Post
  • Collaborator
  • Posting Machine Rare

Recent Badges

57

Reputation

  1. Yeah for sure, built to similar spec as the Blitz R34 in GT6.
  2. Yeah same here, I've wasted most of my money on Nissans for realism so need to try and recover some.
  3. The only R34 GTR I use is the GT500 so is RWD anyway, I might only get an hour a week to play it so haven't driven most of my cars. Some of the time trials are pretty hard, I aim for silver, too slow for golds lol.
  4. O disk doesn't have as much curve in the spokes to get around the caliper. Pay to check on the work site but you'll see certain sizes and offsets available on each disk.
  5. 18x9 +22, 18x9.5 +24, they're on a c35, a mate had the same size on a 32 gtst, but needed more camber and guard work than the laurel, pic maybe not relevant haha
  6. I have A disk meisters with r32 gtr brakes on the front, clears the calipers no worries. O disk rear.
  7. Thieving f****s, no updates so assume no news? That's the problem with the Nissans, in NZ the cops rarely recover them, so they get away with it, mine is on storage insurance at the moment, still has a 5k excess. Good luck man.
  8. I've run the single plate over 300kw but definitely get a twin, if you stay at 400-450hp it'll be good, but you probably won't.
  9. Probably not, the 20RX above has the H/SH turbine haha.
  10. Yeah sounds like he has the loom, weigh up getting a neo ecu, nistune and swapping loom or get a new ecu.
  11. T67 25g 10cm would usually make 20 psi before 4k on a 25 although with a bit more compression and vct than you're running, td06h/sh 25g was usually around 300rpm later, t67 with 8cm was only marginally more responsive but down around 30kw up top. Be surprising for the l2 to not be more responsive than sh especially on a rb20, although old news I'm wondering why the sh with the 20 comp haha, maybe the sh worked better with 8cm than l2 with 10cm.
  12. Back in the times when they were popular it was usually td06l2/sl2 20g, td06h/sh 20g wasn't something you seemed to see around?
  13. Yep, need an r32 or z32 ecu or time for a new ecu, nothing cheap about keeping these cars running these days.
  14. It's a blue plug 33 ecu/loom? Probably the easiest way is to use all the 33 ancillaries on the neo, not ideal but works, nistune be a good idea, if it's alloy cas you'll have to reverse the wiring and coil mounts might be different, otherwise wire the neo loom in.
  15. Assuming it's not the very late s2 wiring diagram/harness you've used, you've reversed the wiring for the cas from s2 to suit neo?
×
×
  • Create New...