Skyhigh

Hi There does not seen to be one thread on this site that actually lists the Jap specs for the sedans. Power: Torque: Known bolt on upgrades etc. A V35 Sedan has just joined the houeshold (pics to follow), but more information is required. Cheers Skyhigh

R31 Silhouette RB30E Manual S1 Cam, Powerchip, Extractors, 2.25" Exhaust with one muffler, no silencer, Hi Flow Cat Heavy Duty Clutch, R33 Airbox with sealed cold air intake, LSD. 117rwkw 14.2 0-400m Citroen Xsara VTS 2004 2.0lt XU10J4RS Hi Flow sealed air intake, Tuned Mandrel Exhaust 2.25", Chip 114fwkw 15.0 0-400m

Ditto

Location, Rim Widths and tyre brand please.

Wow Imagine that baby exploding between your legs.

Nice Job, you can allways get more enjoyment out of doing a job yourself. SM

I was going to say a stuffed relay or switch, but that is much better

How about a ARB bar, that'd look tuff. Photoshop anyone???

40mm is quite a bit, you may require longer driveshafts to avoid camber problems. I would go for a 10-15mm increase in spring and shock lenghth and higher profile tyres. just make sure you put on rally mud flaps Skyhigh

No I want the whole head. $400 Please reply email to: [email protected] Stephen

go for yoko advans. I have had nothing but pleasure with them. be warned though once you try them you'll be hooked.

I will give you $300 for it. and will pickup. email: [email protected]

MB Barina 5 Speed Reconditioned Engine with Stage 2 Watson Race Cam and Reco'd Carby DBA Gold Rotors, (Cross Drilled/Slotted) Speedy Wheels (4) 13x5.5" 4 x 114.3 / 100 Multistud - as new 175/50/13V Tyres Velour Dash (Cream) Velour Door Trims (Red/Black) Yellow Momo Gear Knob + Heaps More Email: [email protected] Car Complete with the only damage being to the front suspension/Chassis Western Sydney

If you changed the Viscosity (spelling?) of the oil, eg from a 5W/50 to a (which is thin) to say a 15W/50 (Thicker) then the pump will not pump as fast, therefor less pressure. Stephen

you havn't mentioned what sort of car it is, in my R31 Skyline it was the lifters, I changed from Mobil 1 5W/50 fully synthetic to 25W/70 Penrite oil and it reduced the noise. Stephen