Jump to content
SAU Community

mattie4270

Members
  • Posts

    332
  • Joined

  • Last visited

  • Feedback

    0%

About mattie4270

  • Birthday 05/04/1970

Profile Information

  • Gender
    Male
  • Location
    wollongong
  • Interests
    living life,custom mufflers/resinators,active exhaust systems

Profile Fields

  • Car(s)
    GTR R32
  • Real Name
    matthew

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

mattie4270's Achievements

Rising Star

Rising Star (9/14)

  • First Post
  • Collaborator
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

6

Reputation

  1. 1000m SPRINTS So Racewars has been run and some good times.I reckon the 1000m events are great, need you guys to get more involved.What better car can you get for a standing 1000m run????
  2. BC 2.9 stroker Tomei head Tomei 270 cams Plazmaman 100mm cooler Haltech Platinum 4inch dump/3 1/2 system(soon to be all 4inch) Precision 76/85 749Kws @ 41psi tuned and built by JEM
  3. True dont have to turn the steering wheel much,or thats the plan anyhow.After chatting to a few drag guys seems like they JUST fit so think i will just bite the bullet and take it on.See if we can crack the 200mph/322kmph mark this year with the new sequential box.
  4. No good doing unless the suspension is compressed to where it sits while driving,plus it will move up and down over bumps.Also need to do some full lock tests,so your method may give me a bit of an idea but wont gurantee all is good.Only way is to do a proper test with a tyre fitted or talk to someone that has run this size on this car already.Thanks for the idea but.
  5. The only way to measure is to dummy fit some tyres if i can find some worn out ones someone doesnt want,but having trouble locating some so thought i would ask if anyone has previously run this size with success.Just didnt want to go blow close to $2000 and find they hit the inner guard,anyhow see what happens.
  6. Hi guys just after some opinions from people who have done this.Now the story is a have an R32 GTR which i mainly use for 1000m airstrip time trials.The car has 1000hp and currently can run over 300kmph but the gearbox which is H pattern with a giken 1-3 gearset just doesnt want to shift fast at 9500rpm,poor thing,lol.So im in the process of ordering an OS88 but cant decided on which ratio.Im currently running 265 RSRs on R34 GTR rims which are about 24.4inches tall.Its pulling about 305kmph through the traps with the stock top gear(0.752) at about 9000rpm,so its close to maxed out.Now the plan is to run MT street radials 265s which have a diameter of 26.5 inch which will work perfect with the stock OS88 top gear(0.852).My question is will these fit diameter wise or will they touch the plastic inner guards?If they dont fit then i will lean towards a set of 265 R888s which are about 25.4inches tall and order the OS88 with the 0.75 top gear.So basically has anyone on here ran 18inch MTs 265s with stock inner guards?Any advice would be appreciated.
  7. Gee i hope so,we need confirmation
  8. They have just released the free to air list and our GP ISNT.Does that mean for our country as well or just overseas.NOT GOOD
  9. ok Piggaz,thanks for that,so they must of thought more oil was needed.What about the internals XKLABA mentioned?
  10. Ok,XKLABA that was the answer i was looking for.I knew they changed something.Do you know what year they changed series?The series1 is probably still an excellent box but worries me spending big coin on a superseeded product.Do you know what the internal modifications were?Bigger shafts,gears,dogs????
×
×
  • Create New...