Jump to content
SAU Community

stealthfoz

Members
  • Posts

    86
  • Joined

  • Last visited

  • Feedback

    0%

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

stealthfoz's Achievements

Enthusiast

Enthusiast (6/14)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

7

Reputation

  1. Pretty much half/ half. But i put dex111 in transfer and redline lightweight in gearbox and it was all mixed together when drained.
  2. Transfer was filled through shifter. Gearbox was filled by pump through filler hole
  3. Gearbox oil leaking into transfer case R32 gtr. I drained my transfer case this evening and it was full of my gearbox oil. Does anyone know what would be the likely cause. Thanks
  4. how much room are you chasing? when i did mine (5years ago so hard to remember) i thought r33 stuff sat engine forward and higher and r32 sat back and lower... either way i dont think there is a great deal in it. i ended up shortening engine brackets as i had 25/30 to get bonnet to clear
  5. how much do you want to pay?
  6. if only they ran it like that all day! it was 4 hours between first and second run
  7. more like $900 now. i think award diff and gearbox are the only ones that have them now as stillway are no longer making these
  8. what sort of HP are you planning on running? a set of aftermarket cams with adjustable gears "properly" dialed in will probably give you what your after without spending so much$$$$ for very little, if any, gains. you cant compare a car tuned with vct by just disconnecting it and seeing the difference as you will definitely feel the difference as its set up to run vct! very hard to compare as every car will "feel" different and react different on the road
  9. just go to bursons and get a standard exhaust manifold gasket and t3 turbo gasket. they normally sell permaseal ones which are good quality. but since you are missing bolts id be checking how flat the manifold is now, it may need a machine or you will keep blowing gaskets
  10. https://turbobygarrett.com/turbobygarrett/turbocharger#GTW3884R
  11. pretty sure thats the gearbox dowel dude, see if it fits into the hole in the back of the block where the gearbox mounts to
×
×
  • Create New...