calcal

Is this still on tomorrow and are there still spots available?

I've used this guide for removing the hicas on both my 32's and it works great and is the easiest way to stop the warning light showing on the dash. http://www.sau.com.au/forums/topic/410492-r32-hicas-removal/ HICAS warning light Many people have said that locking HICAS causes your steering to get heavy, but they simply haven't done it properly. There has been NO change in steering feel with any of the cars that I have done. The only problem is the fact that the HICAS warning light comes on (because it's not there...). This can be solved by cutting the warning sender wire on the HICAS computer or removing the warning light's bulb from the dash. I prefer to cut the wire as it's quicker, easier and if you for some reason lose power steering fluid, it will tell you when your resevoir is low. The HICAS computer is underneath the parcel shelf, it is to the right of centre (when looking in from the boot). Unplug the smaller of the two plugs in the back of it and then cut the green with white trace line wire. You can also just leave the smaller of the two harnesses out and it does the same thing, no ill effects and no HICAS light.

Sold.

I'd prefer not to at this stage but will let you know if i decide to part it out.

Price drop $1,500

For sale is my white r32 gtst rolling shell. It has a compliance plate and can be registered (last rego cancelled Feb 2014). All body work is straight and paint is in good condition. I am located on Brisbane northside near Chermside and can help arrange delivery if needed. Here is a rough list of what’s included and not included. If you want more information or clarity on what’s included don’t hesitate to contact me. Parts included: NISMO 260km/h speedo in gtst cluster HSD HR Coilovers 8kg Front 6Kg Rear adjustable rebound and height adjustable Tein adjustable castor arms Front pedders bush adjustable camber arms Near full interior RB20 gearbox Half complete RB20 engine Full 3” exhaust system Hi flow intank fuel pump Parts missing: I have some of these missing parts that are aftermarket that I can include for the additional amounts. Bonnet (Have R32 GTR bonnet with N1 lip price $500) Diff (Have KAZZ 1.5 way in standard house price $800) Wiring loom (Have R33 RB26 loom modified for R32 gtst price $200) (Have RB25 gearbox with speedo, wiring and 1 piece tailshaft modified for r32 gtst price $1200) ECU Intercooler and piping This car would be great for RB25/26 conversion as this is what I had previously in the car. Please contact me via message or on my mobile .

Yep that's no problem.

I'll put an order in for Anodized Black 356mm fronts with race pads for an r32 gtst, with delivery to Brisbane.

I'm after a R33 Rb26 power steering pump and bracket. Located in Brisbane but willing to pay for freight. PM or call me on 0421 208 523

The sensor is for the electric fan in front of the ac condenser, which turns on if temps exceed 95degrees. Their in r32 and r33 gtst not sure about gtr's though.

Still looking...

Hey mate Awesome build, what times did you get around lakeside? Hopefully I can make it on Sunday to the Japanese nationals.

I have alot of parts left over from my conversion. R32 RB20det long engine done 138,xxxkm $500 Running fine, only removed due to rb26 conversion. R32 Rb20det 5 speed gearbox $200 Ok condition with 2nd gear syncro's and throw out bearing starting to play up. RB20det custom clutch, very heavy with pajero spring. Used but still has some meat left $200 RB20det 3" dump pipe, turbo to cat $130 RB20det green lable AFM mesh removed $70 R32 Gtst stock manual tail shaft $50 19 row Oil cooler kit $120 RB25 clutch slave cylinder with line $30 K&N pod filter with afm adaptor $50 RB alternator workign fine $50 R32 Gtst FMIC piping with all silicon and clamps $100 Nismo 260km/h speedo in a r32 gtst blue backed cluster $260 R32 rear wiper assembly with inc wiper, motor, wiring, computer $40 R32 gtst stock sway bars $50 Gizzmo EBC used comes with all wiring and hoses $120 Exact same model as pictured but used. T70 turbo with XS power manifold (suit rb26) and 50mm wastegate, includes oil lines $300 Tilton flywheel, heaps of meat left $100 All items located in Brisbane north side but can arrange freight at buyers expense. PM me or contact me on 0421208523. All prices are negotiable

Also looking for r32 gtr front guards.

Hey Guys I'm looking for a R33 GTR power steering pump in good condition. I'm also looking for a under car surge tank setup for a r32. Willing to pay postage to Brisbane. PM me what you have. Thanks Callum