akaaa7
Members-
Posts
93 -
Joined
-
Last visited
-
Feedback
0%
Profile Information
-
Gender
Male
Profile Fields
-
Car(s)
R32
-
Real Name
cam
akaaa7's Achievements
-
Thanks for the replies guys. I love a good debate and I learnt a thing or two from the above posts. I'm going sidefeeds regardless if their design is outdated, many people have run them in the past and made solid power. I have no pans to run e85 so that doesn't come into the decision. But mainly they fit without spending a fortune and time making rails to run top feeds. So the question I really want answering is if I get the s15 injectors (that I already have) cleaned and flow tested can I expect them to be all very similar flows? Or does anyone know where I can buy a set that are already flow matched together? While flow matched injectors isn't something everyone gets done, I firmly believe they solve alot of tuning issues when every cylinder is getting it's fair share
-
They are for a Vh41de running a rotrex c-38. So staying with side feeds as I'm not making custom rails. 8 of these will easily see my power goals on about 8psi. Since I got all 8 for 100 bucks, already have spare pintle caps and can get them Cleaned and flow tested for around 200 it could be a option. I understand you can't change their flow and are matched from a selection. I'm just curious to see peoples experiences on jecs manufacturing tolerances weather they have found jecs injectors to differ much when tested a unmatched set. Or have I got the wrong idea here and am I asking how long is a piece of string is?
-
Hey guys are there any members out there that have had Nissan oem sidefeed injectors ultra sonically cleaned and flow tested? If so how did they match up, were they well close to each other or big differences? Just wanting to hear experiences before I fork out a few hundred to get 8 s15 440cc injectors cleaned and flow tested which may not show good results when I can get a set of flow matched from a supplier (more expensive)
-
R32 Gtst Feont White Line Sway Bar Specs
akaaa7 replied to akaaa7's topic in Suspension, braking and tyres
Hey Daleo, I'm in warrnambool victoria. I'm leaning towards modifying a stock sway bar with a chop and extend where needed. If I sleve the inside of the pipe/sway bar where I extend it I think it should do the job. Im not racing. -
Hey can anyone tell me how much more the whiteline sway bar clears the sump compared to the stock one. I have done a vh41de conversion and the sump and sway bar are my last hurdle. Cheers
-
Garage Clearance Sale
akaaa7 replied to Longz's topic in For Sale (Private Car Parts and Accessories)
pm sent -
R32 Standard Engine Mounts- How Much Power/torque Can They Handle
akaaa7 replied to akaaa7's topic in RB30 conversions
I googled some pics of interlocking mounts, seems easy enough to mod the stock ones. Cheers I reakon I'll give it a go. I still would have thought stock mounts would be good for up to at least 300kw, doing a search not too many people are complaining about them. -
R32 Standard Engine Mounts- How Much Power/torque Can They Handle
akaaa7 replied to akaaa7's topic in RB30 conversions
haha maybe im being too cautious steve. I had nismo mounts that are "hardened rubber" but the top of mount has come completely seperated. Only 250kw but a super responsive setup -
R32 Standard Engine Mounts- How Much Power/torque Can They Handle
akaaa7 replied to akaaa7's topic in RB30 conversions
Modding the the factory mounts to interlock sounds interesting, have you had experience with this? Do you know of a link to info? I'll google and see what I can find. Thanks -
Hey guys/girls, as title states what sort of numbers are people running with stock mounts using a 30 bottom end? Trying to decide if I should just go solid. If a mount breaks while under load with big hp can some serious damage happen? I've heard solids mounts can set your knock sensors off falsly, anyone have experience?
-
Hello all, Im doing a vh41 conversion using a 300zx gearbox. My question is does anyone know the actuall length in millimeteres or centimetres of the first half of a tail shaft out off an r33 or a 300zx from the end of the yoke to the end where it bolts to the centre bearing? just working out my options any help appreciated. I'm after actual lengths measered with a tape measure! cheers guys cam. Before anyone says... yes I searched and could not find the answers