bin fishin

needs more rb20's

it was the hub carrier which was cracked. so replaced that and its back to negative camber.

thanks all really helpful.

hi i recently hit a curb sideways and the only thing that bent was the left rear bottom arm that shaped like a triangle, so replaced that with another stock one, and the wheel is still on the piss bad!! before with the new arm in i have adjustable rear camber + rear toe arms, other than that its factory and from what we can see nothing else is bent. how do we get the wheel back to normal??

From New Zealand

hey just put on a catch can to my R32 rb20det, just wondering if i have set this up right? when i went around the block the motor had abit of "missing" while under boost and the motor has stalled afew times when i went back to idle.

hey guys, ive spent around 3 days sanding down a Factory RB20DE Plenum which would replace my factory 20DET plenum, only to find out now that the 20DET plenum has a extra outlet on the plenum which the DE doesnt have! i want to know where the outlet/inlet goes to and what it does. Thanks

my 32.

clay bared, cut and waxed.

thanks for the comments ive fixed the problem it was having the sensor disconnected which made it read -30c we disconnected it when installed the front mount and forgot to put it back on searched the spare parts and found it and stuck it on. no more hot air

hi i removed my air conditioning from my r32 skyline. the radiator, pully and the alternater thing, i can still use my heater, but the air coming out of the fans is HOT! even on the lowest temperate setting (18) it is still damned hot. any one can help on fixing this problem? i wouldnt mind if it was cold air coming out all the time. thanks.

why not mine? the vin is hr32-121611