ka86

Up for sale are a pair of JDM 2006 Series 3 V35 Skyline Tail Lights (also known as S2 Tail Lights as they are the second variant). The JDM variant has the correct amber colour for the turn signals vs North America which has red. One has a crack on the right hand corner. You could seal it if you want to. Asking price is $600 cash ONO Am able to post however buyer pays for shipping and item won't be sent until money has cleared first. Pick up Eight Mile Plains 🙂

I'm glad I was wearing my flame suit haha

As a member for quite some time...epic fail on my part lol. Sorry about that Man! Duly noted. 🙂

Up for sale is a Series 3, 2006 CPV35 front bumper (also called the Sports bumper in the U.S). Whilst the top half is the same as the earlier Gens, the bottom half was redesigned by Nissan. I've put a comparison picture of this (miscellaneous Google images). As you can see, there are some scuffs and bumps and a split on one side. I believe the previous owner had put front parking sensors so there are cut-outs for that along with the rego plate holder. Can be filled/patched and painted. It's missing the tow hook cover as well. Please note, earlier gen aftermarket lips do not fit this (unless you mod/trim but would better either to find a S3 specific variant or go custom). Looking for $400 ONO Pick up Eight Mile Plains 🙂

Up for sale is a Series 3 ('06) V35 Skyline Coupe OEM bumper with optional cameras fitted (some wiring still intact, cameras are untested). This was the final revised update for the V35 (USDM G35s referred to this as the Sports Bumper however this wasn't the case with the V35). There are some scuffs and scratches. Currently painted in K23 Brilliant Silver Price is $650 cash ONO Pick up Eight Mile Plains 🙂 #CPV35 #V35 #Skyline #Nissan #G35

Up for sale is a brand new set of ISR Long Tube Headers, part number IS-SSHD-VQ35 for a 350Z/370Z/V36/V35 NISSAN SKYLINE Comes with the o2 harness extensions (early Gen Z33/V35 only, see the CZP link). More info can be found here: https://conceptzperformance.com/isr-performance-hgc-long-tube-headers-vq35de-vq35hr-vq37vhr-nissan-350z-370z-infiniti-g35-g37-is-sshd-vq35_p_32339.php https://www.isrperformance.com/isr-performance-hgc-long-tube-headers-vq35de-hr-350z-g35-370z/ This right now shipped to Brisbane through CZP using PayPal is $1106 USD or $1725 AUD. Price I'm selling for is $1600 ONO cash on pick up, Eight Mile Plains 😃 #VQ35DE #VQ37VHR #VQ35HR #370Z #350Z #V35 #V36 #Z34 #Z33 #Nissan #Skyline #JDM

They're made by Hitachi. Buy a set of Hitachi ones from RockAuto (Google Rockauto discount codes to save 5%). /Thread

Brake pads sold! Mods please delete 😃

Headers sold! Brake pads still available. Open to offers 🙂

As titled, full set of Z33/V35 Brembo Dixcel Extra Speed (ES) brake pads and gloves/stickers for sale. Pads are rated to 600°C. Includes shims and grease. This version Brembo size is also fitted to the following chassis: Fronts: DC5 Type R Rears: R32/R33/R34 Skyline GT-R Lancer EVO V-VIII WRX STI GDB $250 pickup Wishart $270 posted in AU only #350Z #V35 Skyline #DC5 Type R #Skyline R32 #Skyline R33 #Skyline R34 #Impreza #Lancer Evo #Lotus Elise

Up for sale is a used set of ceramic coated Tomei Expreme V2 Headers (Part number 415001) I bought these second-hand a few years ago. Had the usual surface rust on the flanges and runner colour change. Recently, I've had these sandblasted and ceramic coated by Paul at Thermal Edge Coating Brendale. (Sidenote, highly recommend Paul, super nice guy and his work is pretty good). These have NOT been installed. Headers have been ceramic coated in Tech Line Black Satin (BHK) which is rated up to 1093°C. More info can be found from the data sheet here: https://techlinecoatings.com/wp-content/uploads/BHK-Data-Sheet.pdf Comes with the following: 2x Header to Cat/Test Pipe gaskets (OEM gaskets) 1x Heat Shield Plate (this is used to cover part of the fuel line) 1x Stick on heat resistant piece (you cut this and this goes on top of the provided heat shield) 1x Tomei smooth paste I sourced this with a bunch of stuff from Tomei Japan, not Tomei USA. You can Google why Tomei JP and USA are no longer affiliated with each other anymore. You can read Tomei JP's statement here: https://www.tomei-p.co.jp/tomei-brand/ It seems at some stage, I've apparently scratched a section. When I picked them up, they were fine. I did remove them from the wrapping beforehand and apparently at some stage, when placing these down, I may have bumped into something. It doesn't look like uncured cracking. Doesn't affect the performance but I've added a picture of it. Don't have time to take it back to have it looked at. These are suited for the DE. They will work with the VQ35HR/VQ37VHR however you will need to move some of the manifold studs around. I have included a picture as a reference. For the VQ37VHR, at some stage Nissan discontinued pre-drilled locations to be able to move studs around. Z1 Motorsports advises from 09/10 onwards it may have changed. However, being the U.S, that could also mean Oct of '09 🤷‍♂️. I have read of Z34 owners running these no problems but something to lookout for. You will also need to use DE Cats/Test Pipes etc to fit. The OEM HR/VHR headers are decent and are a lot better then the trash DE manifold. However some would like to upgrade from the crude collector (for emissions IIRC) and this maybe the ticket for them 😄 Asking price is $1600 ONO pickup Wishart, Brisbane or plus postage (buyer pays). Open to offers 🙂 I appreciate some may not want to pay extra for express but insurance and signature on delivery is non-negotiable (i.e I won't send these without these options). #VQ35DE# VQ35HR #VQ37VHR #Z33 #Z34 #V35 #V36 #Tomei #JDM

Mods first post needs to be deleted as wheels have now been sold. Unfortunately it won't let me edit/delete the sale

Up for sale is a set of Riverside Trafficstar RTS Wheels 5x114.3 19x10 +26 (Kumho KU39 245/35/19 with ok tread) 19x9 +30 (Kumho KU39 235/35/19 with plenty of tread) Has rash and some paint flake. Cleared the rear Brembos of a V35 well. Just cleared the front Brembos. I was going to get this polished and the rash corrected for future cars but decided to move on. If you're looking for someone in Brisbane who does JDM wheel refurbishment, highly recommend Sak at https://instagram.com/afterhours_ww?igshid=1162qk1wq0co1 $2K ONO Feel free to PM offers 😃 Pickup Wishart

Up for sale is a set of Rays Engineering Forged Monoblock Prodrive GC-07J (designed by Bridgestone). They have been discontinued by Rays/Bridgestone. Being Forged Monoblock wheels, they're pretty light. 18x8.5 +25 18x9.5 +36 5x114.3 These were off a Z33 with Brembos and have Nitrogen Valve Caps on so assuming they're filled with Nitrogen. Weren't the ideal offsets I was looking for but I don't see many of these pop up so grabbed them. However I'm moving on to a different setup. Has been stored in my closed garage. They have some mild rash. One of them had a little spot of paint that had flaked off in the inner barrel. I had Fixarim patch this and fix the rash on the wheel. However I didn't end up making time to correct the rest. Front tyres have plenty of tread: Greenlander L-Zeal56 235/40/18 Rears need replacing: Bridgestone Potenza REO50A 265/40/18 I'd recommend Spline Wheel Nuts for these. Generally does clear Big Brakes but you'll have to do research on your own setup. I haven't seen many GC-07 series wheels for sale in awhile. The only one I have seen recently is the GC-07C (first version): https://www.vspecperformance.com.au/prodrive-size-used More information including general size/offset setup can be found here: https://www.prodrive-japan.com/en/products/gc_07j/size.html https://www.prodrive-japan.com/en/products/gc_07j/matching.html Pickup Wishart (would like for a pickup that way you can inspect in person if you have questions). I've included some pics of other cars fitted with these wheels (unknown size/width/offsets). $3000 ONO Feel free to PM offers 😃

Sold Mods please delete ?