Jump to content
SAU Community

dazgib

Members
  • Posts

    8
  • Joined

  • Last visited

  • Feedback

    0%

Profile Information

  • Gender
    Male
  • Location
    Perth, WA

dazgib's Achievements

Rookie

Rookie (2/14)

  • First Post
  • Conversation Starter
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

0

Reputation

  1. youve lost me here. i wouldnt have the foggiest how to go about this. I might go the nistune route then if I can find someone to do it around Perth to do it
  2. ye badgaz ive been reading misfire threads for weeks. they all say coilpacks but mine are brand new and ive a splitfire earthing kit too so it must be timing/fuel related causing it to miss. its popping like mad between 4.5 and 5.5
  3. just fitted a RB20 turbo actuator so 10psi
  4. @badgaz theres a misfire on full throttle from 4.5 to 5.5k revs and fine after that so thats one of the reasons i want to get a map done as well as its going to be quicker and more efficient hopefully i was thinkin the increase in boost might have confused the ECU maybe. I have a brand new fuel pump, fuel filter, spark plugs gapped to 0.8, brand new OEM coils and brand new pink label AFM and still it misfires bad. its not my daily so i wont be drivin it until I get this sorted
  5. Im looking for opinions on whether to go for Power FC or Nistune'setup. i have a S2 R33 GTST with Pod Filter, 3" High Flow Cat Back, RB20 Turbo Actuator and a Walbro 255 Im not looking for crazy power and will not be changing from stock turbo in the future either. I also just have the stock SMIC but would upgrade to FMIC or R34 SMIC if needed. Also, where in WA would you recommend to get it mapped/tuned thanks
  6. Thanks for the reply J. Yeah, I have a Spec 1 reinforcemant bar. Do you know what sort of work would have to be done to the reinforcemant bar to enable me too fit the bumper on and how would I go about bolting it on to the car? Im not very good with working with bodywork. I think my loom has the wiring for the spots and the indicators.well I hope so
  7. Hi, I have a white R33 Spec 1 RB20e. I have sourced a spec 2 bumper for it in white. I have a picture of a Spec 1 with a Spec 2 front bumper and I know the headlights of a Spec 1 will sit out a bit over the Spec 2 bonnet - I dont mind this. However, what I need to know is will the Spec 2 bumper go straight onto the Spec 1 car - ie. how will I mount it and the other thing is - will the loom thats present on my car for the Spec 1 bumper, match up with the front indicators/spots on the Spec 2 bumper. Thanks a million Daz
×
×
  • Create New...