spenda

Wheels sold engine still here

Hi guys Need this stuff gone asap im moving out of my house and will have nowhere for it to go.. Vk56 engine - 2750 plus post - 100 I bought this engine for nearly triple the price i have on it atm only just under a year ago from r.i.p.s I have taken the sump off and rocker covers this engine is spotless.. appears to have been recod before i got it.. its an 09 model vct heads.. the engine has been cleaned by me very meticulously even though it was already very clean when i bought it but it looks as new now.. The engine comes with intake manifold and alternator and flex plate to use as a reference when getting a custom clutch made for conversions.. no loom, starter or sump as i was in the process of making a dry sump when i decided to give up on cars all together and sell my project r35. Also the timing cover has been removed and oil pump has been stripped out as i was planning on going dry sump The engine also comes with a 5 stage barnes second hand pump which has been disassembled to check.. upon disassembly i noticed all orings and one section olate needed to be changed.. i can help organise these parts through jhh if you cant find a barnes dealer.. I have had this engine plugged up and taped up to prevent contamination throughout my time of owning it. Anyways i dont know kms but like i said its spotless pics will be up tonight as i am posting on my phone. Ccw c10 18x11 wheels 1500 + 100 post i dont know offset exactly but think they are around 0.. they are to suit an r35 gtr but might be able to run them on a 32-34 gtr not sure.. might have a bit too much poke.. one wheel has a small amount of rash from rubbing on the inside of a car trailer.. Parts are located in brisbane please message or phone me on 0413347774 i will get back to you asap as im at work.

minus engine - 40k

Hey guys I have decided to move to overseas to start a new chapter on life. That said I need to get rid of the r35. The price I put on this is very fair in my opinion, yes you can nearly go and buy a whole r35 jdm car for this price but we aren't comparing apples to apples there are we. Therefore my price is non-negotiable, I will be loosing a great deal of money myself. Anyways the car specs 09 R35 Cams roll cage, extends through to front strut towers Front strut towers are still in place to hold upper control arms, and be eligible for time attack. Full one piece carbon doors 3 piece full carbon dash including centre console Omp Carbon race seat Carbon roof Carbon boot Carbon rear diffuser, which has been burnt in the middle at the end from previous exhaust setup Carbon wing Mca Gold series external reservoir coilovers Dodson front upper control arms complete hardrace rear arm package whiteline rear swaybar front whiteline swaybar links and stock swaybar CCW C10 18x11 wheels all around not sure of offset Fuel cell setup underneath deleted rear seats Surge tank setup also undernear rear seat area 3 x bosch 044 pumps and 2 spare pumps will be included Koyo radiator with jic -16 fittings welded on 2 x Sparco steering wheels, one is leather and is worn a bit, used for moving the car around and the other is the exact same but as new condition and suede/ Works bell quick release system / integrated paddle shifters Body panels included Front radiator core support – which has integrated fans and radiator shroud Front Headlights Standard front guards Bonnet 2 x front bumpers Rear bumper Rear lights Engine/Driveline VK56 2009 engine, the engine is as clean as I have ever seen, I have pulled off the front timing cover, sump and rocker covers.. this engine seems to have been reconditioned or had the easiest life ever. Dry sump will need to be made, I can make the sump if you want? R33 GTR diff mounted in rear No Gearbox What I have done to the car - 3 engine decisions later haha I have chopped off the rear guards that were modified, as I did not like the style and wanted the nismo gt3 r35 look, I can help source oem rear guards from various people. this is probably the biggest issue the rest is easy. Modified the front and rear subframes, the front I chopped out the bellhousing mount for the vr38 as I needed clearance to mount a gearbox behind the engine. The rear subframe has been modified to utilise a gtr diff (R33 in my case) which will be included however the position of the diff will need to be changed as when I put the diff in originally it was to suit the rb26 I was using. The car is now built around a vk56 and the centreline of the engine has now moved quite a bit. Cut a hole in the gearbox tunnel to accommodate s shifter setup, just need to cut a hole in the removable plate I made when gearbox position is worked out. Other things needing doing some minor rear bar work to support the rear wing fix rear section of rear wheel wells make bonnet mounts and top guard mounts as they no longer exist, I am currently waiting on the radiator core support to work out the positions of everything as this support holds lights in correct places which means you can work your guards and bonnet off that. I have plenty of other parts sitting around for the car like the standard dash module (1x broken tab but doesnt need this one to mount into dash, also comes with new plastic screen as per oem box in pic) which I was going to try and adapt to be used on an aftermarket computer and wiring. Couple of boxes worth of standard parts and trinkets. And probably missed a whole bunch of things on the car. At the end of the day this is a very serious project car, and I am going to miss it a lot. I wanted to turn this thing into a very close replica of a 2009 fia gt1 r35 which did run the vk56 v8 engine however I was going to go twin turbo PRICE - $45k contact via 0413347774 – spencer, anytime via text or before 10pm via phone. The car is located in mackay north qld, transport will be an additional cost obviously, might be able to help get it to brisbane. http://i222.photobucket.com/albums/dd109/spendabenda/unnamed18_zpsce96c7d4.jpg http://i222.photobucket.com/albums/dd109/spendabenda/unnamed16_zps00bd1d61.jpg http://i222.photobucket.com/albums/dd109/spendabenda/unnamed17_zpsb9f7201a.jpg http://i222.photobucket.com/albums/dd109/spendabenda/unnamed_zps88aee6e4.jpg http://i222.photobucket.com/albums/dd109/spendabenda/unnamed1_zpsbb34fe3d.jpg http://i222.photobucket.com/albums/dd109/spendabenda/unnamed15_zps7320717d.jpg http://i222.photobucket.com/albums/dd109/spendabenda/unnamed12_zps00c61f90.jpg http://i222.photobucket.com/albums/dd109/spendabenda/unnamed13_zps41030694.jpg http://i222.photobucket.com/albums/dd109/spendabenda/unnamed11_zps75f021bc.jpg http://i222.photobucket.com/albums/dd109/spendabenda/unnamed14_zps594eee9e.jpg http://i222.photobucket.com/albums/dd109/spendabenda/unnamed10_zpse4b6f05d.jpg http://i222.photobucket.com/albums/dd109/spendabenda/unnamed9_zpsebcfbe81.jpg http://i222.photobucket.com/albums/dd109/spendabenda/unnamed7_zps01063ba2.jpg http://i222.photobucket.com/albums/dd109/spendabenda/unnamed6_zpsf4cf73c9.jpg http://i222.photobucket.com/albums/dd109/spendabenda/unnamed5_zpscd3c1e3c.jpg http://i222.photobucket.com/albums/dd109/spendabenda/unnamed8_zps2703d298.jpg http://i222.photobucket.com/albums/dd109/spendabenda/unnamed4_zps94976a32.jpg http://i222.photobucket.com/albums/dd109/spendabenda/unnamed2_zpsd71b6266.jpg http://i222.photobucket.com/albums/dd109/spendabenda/unnamed3_zps3bdadcd3.jpg

Found one guys thanks for your help

Thank you sir, will call them shortly

Hey guys As per the topic title i am chasing a standard front bumper, not worried about paint condition or colour.. Could also be chasing a standard lip at the right price as well.. Anyways let me know what you have.. Thanks in advance. Btw the wanted forum would not let me start a new topic so thats why its in this category.

Z32 afms sold Pm me with some offers on the other stuff guys

R34 front bar sold Thanks buddy

Ame tm02s sold

no sorry they would not.. you would need 200 series hose with the teflon inner lining and all new fittings to suite that type of hose.

R34 gtr standard intercooler sold..

hey guys, doing some major upgrades to my mates r34 gtr so selling off all thats left and a few of my parts i have collected over the years.. ive taken pictures of most of the items but if you want pictures of the other stuff just ask me. GTR Trust Drag intercooler 600x300x150mm, VGC, part of the end tanks chopped off for the different orientation i was planning while running it upside down - $1900 Full Set r34 gtr standard brakes with slotted front and rear rotors, rotors have been painted a bit to keep most the rust off, pads are a bit old and could do with a new set - $1600 AME TM-02 wheels, 18x10 +15 x4 on 1200km old achillies 123s semi slicks 265x35x18 - all very good condition no gutter rash, pretty much new still only one or two marks, can fit 380mm rotors behind them as per pictures, backs sit in a bit on the guards because of the camber - $2150 Genuine Te37's, 19x10.5 +12 x4 on brand new maybe 2km old (still have the tyre dicks on them) federal evo 595 275x30x19 - $4250 Surge tank setup, its to suit an r34 and mounts in the boot on the passenger side corner, has all lines needed for the install including the two not pictured that run to the fuel rail and from the regulator back to the surge tank, it can be modified very easily to suit any other model ie skyline or silvia.. consists of two bosch 044's and two magnafuel regs all speedflow fittings and lines - $1050 Peterson 4 stage dry sump pump, one damaged jic fitting as per picture and machined shaft for a hex drive (not sure why old owner did this must be an american thing) - $350 R34 gtr Power fc - tuned for a t04z on 6boost manifold, z32 airlfow meters, standard intake manifold and 800cc sard injectors made 330ish awkw, pretty sure there is a hand controller in there somewhere as well - $600 6boost 2jz manifold, twinscroll t4 flange.. can fit a gt45 frame turbo under the bonnet.. brand new - $1000 r34 gtr standard intercooler, very good condition - $350 tomei type rj fuel reg, very good condition - $150 2 x Z32 airflow meters and apexi pod filters, very good condition - $450 Nitto rb26 clear timing cover - $75 R33 gtst brake calipers, as new pads.. great condition - $350 rochester 14mm 1200cc injectors x 4, never been used only fitted - $400 R33 gtr passenger seat - $200 buddy club fixed back seat, has rail to suit s13/4/5. black with grey inserts for a normal sized person, has a small tear in the fabric other than that its as new - $450 sr20vet mazworx lhd or RHD without brake booster intake manifold, no fuel rail as new condition just needs a throttle cable bracket welded on - $500 will also be selling the following shortly r34 gtr front bar, very good condition silver r34 gtr front lip, very good condition silver r34 gtr standard side skirts and nismo style carbon addons r34 gtr front driveshaft - going with os88 box so no longer need it all parts are located in mackay, north qld.. postage can be arranged for any of it. thats it for now.. please contact me (spencer) on 0413347774 or via pm

Ive got 380mm alcons sitting behind 18" ame tm02s?

Sorry they have been sold with the shell