Jump to content
SAU Community

33Bane

Members
  • Posts

    6
  • Joined

  • Last visited

  • Feedback

    0%

Profile Fields

  • Car(s)
    R33 Gts-t

33Bane's Achievements

Rookie

Rookie (2/14)

  • First Post
  • Conversation Starter
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

0

Reputation

  1. Hi guys, I am looking for a bonnet and bonnet latch assembly, 1994 Series One, R33 GTS-T Coupe. - Stock bonnet - - Black or Grey would be appreciated, however other colours will be considered for sure. - straight and rust free please I am in the Mt. Macedon Area Pm here please Thanks very much Regards
  2. Well, after a couple of weeks mucking about, it turns out that the new battery I had fitted had dropped a cell, so another new one and everything is fine. As it has been kind of fun tinkering with this old thing again, i have decided to muck about with it some more. As such, can anyone confirm that the instructions in the attached Youtube video for changing brake fluid would be relevant to a Skyline? Are they any Skyline specific issues i should be aware of whilst attempting this? Cheers,
  3. I am retiring my R33, I will consider a swap or sale. I am after a 1996-98 Audi A4 1.8T Quattro. Manual or auto i dont care. Preferably silver but i am open to options. I also dont care if it has leather or not. As long as its in good nic, i will look at it. My R33 GTS-t is as follows. 1994 Nissan Skyline R33 Coupe. Factory Black in good condition. (dint in rear quarter panel) 2.5ltr In-line 6cyl, Turbo, EFI 4 spd Auto. All wheel steer, rear wheel drive. 14 months Reg, (it has two but i will add 12) Vic Reg. Black and charcol clothe interior X-force 3in turbo-back stainless Exhaust. (great sound but not loud and obnoxious) monza Front-mount inter-cooler K&N cold air induction Engine fitted out and serviced by Unique Auot sport in Sydney Whiteline workshop fitted Works pack: - Bilstein coilovers on all four corners - polyurethene camber and castor kit - fully adjustable front and rear sway bars - engine strut brace - bilstein springs DBA4000 vented and slotted rotors on all four corners Bridgestone S03's on all four corners (nearly $2000 worth in tyres) front 235/45/r17 - 6 months old rear 255/40/r17 - 2 months old Barossa 17 inch Rims, believed to be the only ones of their kind in Australia GT-r front bar Black tinted windows. Exon headlight globes for high beam. 169999kms Garaged always One Australian owner (me) since 2000 and one japanese owner prior to importation. an amazing car to drive, serious stopping power and brillant cornering. I have never been pulled over by the police and never been defected, this lady is a clean, well presented and well looked after car. It just doesnt fit two kids, two prams and toys!! $13800 (or $15800 with dint fixed) Bane This car is registered in VICTORIA [attach ent=105281:15_Feb_06.23.JPG]
  4. Fellas, i dont want hijack a thread here but, i moved from NSW recently where John and the boys at UAS in sydney had fitted my R33Gst-t with FMIC and CAI amongst other things. i got it inspected and RWC'd down here when i swapped over the Rego. The inspecting officer went over my car with a fine tooth comb, but didnt say boo about my Pod (which is fitted in fully enclosed in a fibreglass box) and FMIC. but i understand from reading here (and the LAW posted elsewhere on the forum) that you can only have one of these two mods, anybody got some clarification??? Does it HAVE to be stock or can it be fully enclosed? can do photo if needed.
  5. Hello peoples, Ronin33 has a fair idea here, Vic liners are currently being shown up by tasmanians that showed a certain prowess for swimming. I had a look at the Sa thread and its got a good aray of skills, it an uncharacteristic show of co-ordination from our south aussies bretheren, At the best is means there are some money to be made for those who have the notion for it. anybody willing to step up and offer their skills and make some money? Bane
×
×
  • Create New...