Robyn Psycho bitch

Hi my 1997 rs4 stagea is up for sale. fair condition for its age 268889 km turbo needs replacing rego until 10/6/ 2014 Has to go as I dont have the funds for repair and rego located at Harrington NSW $ 4000 email [email protected]

Hi I started to remove the turbo and I found a heap of oil in the pipes..... and I have about 3mm end play in the turbo.... I need a cheap stock turbo...... I only want to sell the car regards robyn

Hi I started to remove the turbo and I found a heap of oil in the pipes..... and I have about 3mm end play in the turbo.... I need a cheap stock turbo...... I only want to sell the car regards robyn

hi the noise only starts when the motor is warm .... it isnt there at idle comes in at about 2000 rpm ... I dropped all the belts and its still there.... I took the heat shield of the turbo and the noise changed ... I dont know too much about these things only what I learn on these forums .....I am 60 year old girl that likes import cars I am near Taree nsw...

Hi all I have a s1 stagea 1997 with a rb25det engine It has developed a wine from about 2000 rpm up it sounds like the turbo..... its a high pitched wine and gets worse as the rpm rises but when it is backed off it reduces in loudness buy when you rev it the wine follows the rpm still drive-able but the wine is very loud any ideas ? or does anyone want to buy a stagea s1 about 265,000 km fair condition 2 months rego $3000 firm regards Robyn

hi I am down near Taree NSW is it a stock turbo and is it good for the s1 rb25det

just looking for a stock turbo regards robyn

hi everyone my 1997 c34 rb25det stagea has blowen the turbo I need a new or used replacement ...it has a three bolt flange on the outlet to the intercooler can anyone help me regards robyn

hi I am not angry just sick of parts people selling me wrong parts and not wanting to refund. my shafts are screwed they are getting clunky with thanks Robyn

Hiuys I need to replace both my cv shafts on the front of my 7/98 series 1 staega awd question is are the r33gtr shafts the same all I can find is these ones .....thanks in advance Robyn Front LH CVS-801L Front RH CVS-802R from suzukisuper

Ho everyone. I have a S1 stagea and I am looking for a set of heavy duty rear springs I want to maintain standard height just want heaver springs for towing. does anyone know where I can get a set or does anyone have another idea on how to stiffen the rear for towing a caravan. thanks for your replies. Robyn

Hi everyone I have a 1995 GTS25T Auto for sale,,,, This was a fresh import this year and complienced in July... it has 9 months rego , New tyres (16's) new Kenwood MP3 player , Electric Boost guage, the rest is stock.. it is a 1.5 series .. 81,000 km ... This car is A1 condition inside and out... it is Silver in colour...must sell as I have bought a TT Supra .. The Car is in Harrington which is near Taree,,,, I am an older driver and the Car has not been raced or floged... Price 14,900 Phone Robyn 02 65563199... for more info or reply to this post for emailed Pictures or email me .. Robyn_Aileen@bordernet .com.au

HI Everyone... I ahve a 1995 GTS25T atuo for sale ... This car hasd 81,000 km on the clock it was a fresh import this year and complienced in July this year ... 9 months rego.. new tyres (16's) , new Kenwood MP3 player, electric boost controler 5/7/12lb boost settings.. extra air intake... the rest of the car is stock... this car is in A1 condition both inside and out... NO dents... Silver in colour Price $ 14,900...Phone 02 65563199 and ask for Robyn.... reason for selling? I bought a TT Supra.. The car is in Harrington whioch is near Taree.

OK THE SET UP is basicly two systems in one the original boost controler is maintained the earth lead to this controller was cut and a diode placed in line to stop backfeed to the ECU A 2nd earth wire to a switch again with a diode inline to stop backfeed.. I then cut the main line to the wastegate inserted a T joint and ran a line to a electric shut of valve and then to a boost control bleed... so how it works ..nothing turned on standard boost 5/7 psi turn on the earthig switch to standard controler constant 7 psi boost ..Standard control switch off and the secondary controler on adds the standard boost 5/7 plus secondary boost added = 5+5 =10 and 7 +5=12 also with both switches on 7 psi original plus 5 psi secondary constant 12psi see its simple

Hi everyone. thank you for the advice I have built the set up I discribed the result is setting 1 standard boost settings 5/7 psi 2nd setting 8/10psi 3rd setting constant 12.5 psi ok I can use the right foot to control the boost but this was a bit of a challenge for me, to do something I was told by a guy that couldn't be done... hahahaha not only that but it looks nice with the little lights working...