Jump to content
SAU Community

Mitchee

Members
  • Posts

    365
  • Joined

  • Last visited

  • Feedback

    100%

About Mitchee

  • Birthday 14/07/1987

Contact Methods

  • Website URL
    http://

Profile Information

  • Gender
    Male
  • Location
    Ryde, Sydney

Profile Fields

  • Real Name
    Mitch

Recent Profile Visitors

7,001 profile views

Mitchee's Achievements

Proficient

Proficient (10/14)

  • First Post
  • Collaborator
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

37

Reputation

  1. Been following this since the beginning. Good on you for sticking with it. 2 years to the day since you started this thread!
  2. Pickup in Ryde, Sydney. Contact via PM only please. 2x RADCAM HD20 In Car Camera Kits. Used in rally and race cars. Never powered up or used, I can only assume they work but they've been sitting around for a couple of years. $200/kit R34 GTT Auto Dash Cluster. Approx 80k km. Dusty but perfect condition. $50 4.38:1 R200 Diff. 5 bolt half shafts. No input flange as I stole it for another diff. Mega tight shimmed LSD. $250 DriftWorks thermostatic oil cooler kit. Used for 1000km. $350 New HKS Oil Filter UNF 3/4-16 thread $40 Apexi 3" Exhaust Silencer Valve $150 2x New Genuine HKS DD Mushroom Filters. 1 has an 80mm flange, the other a 4 bolt flange which I think is Z32. $50ea Genuine ARC Catch Can/Washer Bottle combo R33/R34 GTR. Super rare and will be in perfect condition after a polish. Currently dusty as its been sitting around. $500 RB26 Carbon Coil valley cover. $150
  3. https://insolvencynotices.asic.gov.au/browsesearch-notices/notice-details/EDWARD-LEES-JAPANESE-AUTO-CENTRE-PTY-LTD-101097714/c84a9ad0-9437-48b1-970a-709c523807c3
  4. This will rip sooooo hard. Perfect street car combo of bits in this in my opinion.
  5. Something is being powered when it shouldnt be, and this is backfeeding the ECU causing it to stay on. Is there any wiring in your engine harness or near the ECU connector that isnt standard? Ive seen on some Stageas the A/C relay was fed with constant 12v from the battery, causing the ECU to remain on. Try removing the A/C relay in your engine bay, and see if the problem goes away.
  6. This is true for any universal Haltech ECU such as a Platinum Sport or Elite, but not the Platinum Pro Plugin series ECUs. The Pro only supports the stock setup or 24+1 as explained above. For the single cam home/sync signal, in the past I've just covered the stock disk with a sticker and cut out one of the inner 6 windows to make a single slot for the optical sensor to pick up. Works fine.
  7. 6boost have a lifetime warranty against cracking, so there's that. I had a chat to Jez about this car, interesting story. Cant wait till its back on the road.
  8. I've posted them in a few places around here, haha, so im sure he can find them. Cant wait to see how this thing will go with an unrestricted rear side and some Jez wizardry.
  9. 6466 1.0 twin scroll is an amazing match for a 3.2L..
  10. Mitchee

    Spool 3.4

    These are all I have. Excuse the switching between HP/KW and the squirrely AFR trace. 18psi 24psi 30psi
  11. You must use 12 teeth on the crank if you want this setup to work with your Haltech Platinum Pro.
  12. Mitchee

    Spool 3.4

    No I mean Cootamundra. Motive DVD Drag Battle. KW/HP.. They're one and the same, sometimes ill quote one or the other haha. Ive made the peak power number that im comfortable running, and the car is useless like this. I prefer the car with around 400-420rwkw (540-560rwhp) as its the least 'scary' to drive and is still plenty enough to bake 3rd gear at 100kmh. Remember we're talking peak numbers here. The car still has 300rwkw at 4000rpm regardless of my peak power so yea its 'torquey'
  13. Mitchee

    Spool 3.4

    I don't have the Spool built short motor but I purchased the 3.4 rotating assembly and had my engine builder do the work. Airflow through the head is hugely important, don't skimp on this. I personally wouldnt put cams bigger than 270 as you don't need the revs especially for street use, make sure you degree them with a dial indicator. With my 26 head and 1mm OS valves, 10.8mm lift and 260 degree procams, mine makes peak power just before 8000rpm with a broad torque curve from 3000rpm. Turbo is a 6466 with twin-scroll 1.0AR hot side. Has made over 800rwhp on 28psi but its useless at this power, I actually prefer gate pressure which is 14psi creeping to 19psi and about ~550rwhp
  14. 3L+ and the 6466 is a killer combo.. Here's what I was seeing during some early road tuning of my setup... 3.4L, 6466, 1.0AR 26psi, 3600rpm loading it in 4th... will make 5 - 6psi instantly in any gear if the revs are over 2000rpm.
  15. The more I read about people's horror stories and being shafted by workshops or being underwhelmed by the outcomes of a build, the more I want to start building motors for people. It's not rocket science. In fact its almost common sense when it comes to choosing the correct components for the purpose or aim of your project. There is a huge wealth of information on this forum and I just don't understand how people can still be getting things so wrong.
×
×
  • Create New...