jim13

EDIT: New contact number 0420228762 Location of parts: Hornsby Location of subframe, engine conversion, diffs: Peakhurst Eastbear mirrors sold Strick- I don't have tools that I will be selling thanks

Hi everyone, I have reluctantly decided to part out the S13 I have been building. For sale: My pride and joy, my VH45DE Conversion. This was in the car for final mockup before being pulled out to paint the shell. I originally bought a whole q45 that had a running engine to make sure I had the perfect base engine. It can be run as is in NA or Turbo form. I as planning on running NA initially with 250-260rwk with a tune but people have these engines pushing out 400rwkw+ on standard internals with low boost. This engine can be run with the factory intake manifold but I would finish the additional Porsche Cayanne Turbo Composite intake manifold thats included. The original throttle body matchs up and works perfectly and the only thing that is required is an adapotr plate that could be 3D printed or water cut. The intake manifold is a great addition that be proven to see 30hp+, has a lower profile and is a good 15kg lighter that the original setup. This conversion is an absolute gem and everything has been done to make this a drop in affair from the engine mounts, alternator relocation, shifter mount, gearbox machining to the bolt in brake booster that will clear the cylinder head allowing you to mount it closer to the firewall. This will easily go into and S chassis, Z32 or skyline. Its 99% of the way there it just needs a great car to star in. $5500 Engine + Drivetrain + ECU + Loom New timing chains New oil chain Changed to metal backed chain guides New Nissan Headgaskets ARP Head Studs Head Skimmed flat, valve guides and seat checked Heavy Duty upgraded valve springs 256 Degree Custom Camshafts (The engine is seriously undercammed from the factory) Hydraulic lifter shim kit Block Oil resitrictor fitted Porsche Cayanne Turbo lightweight composite Intake manifold Powdercoated valve covers with 10AN earls fittings 4x Dash 10 AN 90 Degree 4x Dash 10 AN Straight 2m of Dash 10 AN hose Mazworx Engine Mounts Mazworx exhaust flanges Mazworx Gearbox adaptor Nismo Gearbox Mount UAS Slave Cylinder UAS Clutch Pivot Fork Z1 Motorsports strengthed Z33 Clutch Fork Custom Billet Fuel Rails Z32 Flywheel ARP Flywheel bolts Competition Clutch Z32 Stage 5 Clutch Tailshaft input to box Xcessive Manufacturing conversion shifter bracket Xcessive Manufacturing VH45 Alternator Relocation Kit + Engine Stand Spares: Heads Intake Manifold Oil pump Injectors Various Covers Coilpacks Sump + many more items i can't remember Rocket Bunny Kit S13 with perfect fitment I had just fitted everything up before paint before I decided to part it out: $950 Front Bar Rear Bar Sideskirts Ducktail East Bear Mirrors S13 $160 2x Precision 39mm Wastegates $220 Each Stock camber arm to fully adjustable kit featuring a weld in joint bearings: Any S Chassis $25 Caster Arm Kit: Universal $20 For these following kits all thats needed is the threaded rod to make your own hardcore suspension arms that have sperical ends that are easy to find replacements for. Once you have the threaded rod which can be bought for $10 a piece online the arms just go together like lego. And are just as good quality as Cazman Arms. There is a write up on NissanRoadRacing with a link to the excat piece you need. Easy! Toe Arm Kit $85 Traction Arm Kit $85 S14 Subframe With LCA's and all other arms $150 Goodridge brakeline Kit S13 $150 Energy Suspension: For S chassis Rear Diff Bush Set 7.1118G $25 Rear CAB Set 7.3119G $60 Tie Rod End 9.13103G $2 Sway Bar Link 9.8120G $15 Steering Bush 7.10104G $10 Front Control Arm Bush 7.3114G $15 Alloy Steering Wheel Spacer $20 Earls Fittings all brand new (price per fitting) 9x Dash 10 AN Straight $12 6x Dash 8 AN Straight $10 2x Dash 8 AN 90 Degree $25 13x Dash 6 AN Straight $8 5x Dash 6 AN 90 Degree $20 6x Dash 6 AN adaptor to 5/16 Tube (Used to go straight from AN to OEM fuel hard line) $10 2x Dash 8 AN adaptor to 1/2 Tube $12 14x Dash 8 AN weld on Alloy $5 10x Dash 10 AN weld on Alloy $5 1x Dash 6 AN weld on Steel $5 1x Dash 6 AN to Bosch 044 In $10 1x Dash 8 AN to Bosh 044 Out $10 6m Dash 6 AN Earls Hose $25 permeter 0.5 Dash 8 AN Earls Hose $15 Billet Resuable Fuel Filter with 8AN inlet/outlet $70 Garret GT4294 Turbo $850 - With GCG Vband 3.5inch outlet - Oil line and AN fitting included Infiniti Q45 Caliper Upgrade $50 S15 Helical R200 with driveshafts $325 R200 with 5 bolt spread LSD with 4.11 FD to suit S13/180sx 4 bolt subframe $150 Koni Coilover Kit $1250 This is quite a popular setup now given the poor shocks commonly found in aftermarket coilovers with limited adjustment. There are extensive threads detailing everything on NissanRoadRacing. This cost $1650 but Im asking $1250 2x Koni Shocks 8610-1436 Race 2x Koni Shocks 8041 1208 Sport Ground Control Coilover kit with Eibach springs 2x 400 Lb Springs 2x 500 Lb Springs Rear pillowball strut tops The only thing required is front housings supplied by Veilside on NissanRoadRacing.com and front top camber plates This setup will beat anything even triple the price and the ability to properly adjust shocks and change springs for another set by Eibach make this perfect. Stack Datalogger $880 For sale is a STACK ST8952 Standalone Data logger with expansion module. This Data logger has 8 inputs and monitors and records up to 20 channels at up to 50Hz a channel. This is a standalone system that doesn't have visual display but I can be added if you wish. The system also has an additional module with a further 8 inputs. This system also has a inbuilt telemetry capability. Included in the sale: STACK ST8852 Module + Loom STACK Expansion Module + Loom STACK Network Harness STACK G Sensor ST791 Cost $530 STACK Lap timer receiver ST543 and Lap timing beacon - cost $500 needed to generate the track maps in the analysis software STACK ST8990 PCAN-USB Download Cable DATAPRO V6 Softare (The latest and greatest fully upgraded software enables you to use generic sensors instead of the expensive STACK ones. Pressure and temp sensors can be had from $20 and any sensor that outputs volts or is resistance based can be integrated using the custom sensor manager shown in the pictures below) DataPro is available in 3 versions Basic, Semi Pro and Pro (math channels, custom sensor inputs, rainbow, import and synchronize external video feeds) - The Pro upgrade Cost $950 The performance upgrade pin has also been activated at a cost of $450 giving the predicative lap time function and brake bias. Speed sensor gearbox pickup included http://s28.postimg.org/trzif5ph9/a11.jpg http://s28.postimg.org/ntlp4x6il/a12.jpg http://s27.postimg.org/tpf4l07oz/image.jpg http://s27.postimg.org/53t7guzn7/image.png http://s27.postimg.org/up5fgpmur/image.jpg http://s27.postimg.org/j1bdm5xpv/image.jpg http://s27.postimg.org/g9s3vjz77/image.png http://s28.postimg.org/y0z6k7mf1/image.png http://s28.postimg.org/k4w05fwhp/image.png http://s28.postimg.org/6uhc3ekot/image.jpg http://s28.postimg.org/jj719c1fh/image.png Permacool Oil Cooler thermostat $45 Oil Filter relocation kit $25 http://s28.postimg.org/kn4xqiq7x/a41.jpg Please PM, reply in the thread or call 0499988821

Hi guys, Edit: Additional Components have been added changing the asking price. For sale is a STACK ST8852 Standalone Data logger with expansion module. This Data logger has 8 inputs and monitors and records up to 20 channels at up to 50Hz a channel. This is a standalone system that doesn't have visual display but I can be added if you wish. The system also has an additional module with a further 8 inputs. This system also has a inbuilt telemetry capability. Included in the sale: STACK ST8852 Module + Loom STACK Expansion Module (requires loom) STACK Network Harness STACK G Sensor ST791 Cost $530 STACK Lap timer receiver ST543 and Lap timing beacon - cost $500 needed to generate the track maps in the analysis software STACK ST8990 PCAN-USB Download Cable DATAPRO V6 Softare (The latest and greatest fully upgraded software enables you to use generic sensors instead of the expensive STACK ones. Pressure and temp sensors can be had from $20 and any sensor that outputs volts or is resistance based can be integrated using the custom sensor manager shown in the pictures below) DataPro is available in 3 versions Basic, Semi Pro and Pro (math channels, custom sensor inputs, rainbow, import and synchronize external video feeds) - The Pro upgrade Cost $950 The performance upgrade pin has also been activated at a cost of $450 giving the predicative lap time function and brake bias. In light of this I'm asking only $999 for the unit, which is pretty cheap for a data logger with the most expensive features sensors included. Please contact me on 0499988821 as this will be posted to multiple sites

Hi guys, Hate to see this go but I've sold the car it was running on. For sale is a STACK ST8952 Standalone Data logger. This Data logger has 8 inputs and monitors and records up to 20 channels at up to 50Hz a channel. This is a standalone system that doesn't have visual display but I can be added if you wish. Included in the sale: STACK ST8952 Module + Loom Starter Network Harness Wheel speed sensor ST670 cost $200 Solid State Oil Pressure Sensor ST747 cost $130 G Sensor ST791 Cost $530 Lap timer receiver ST543 Cost $320 Needed to generate the track maps in the analysis software DATAPRO V6 Softare (The latest and greatest fully upgraded software enables you to use generic sensors instead of the expensive STACK ones. Pressure and temp sensors can be had from $20 and any sensor that outputs volts or ohms can be integrated using the custom sensor manager shown in the pictures below) The performance upgrade pin has been activated at a cost of $450 giving the predicative lap time function. The only thing you will need is a STACK ST8990 or ST8991 Download cable as I lost the one that came with the unit. I have seen these come up on ebay or racecarsdirect.com every so often for $50-100 used, buy it new or make one your self if your clever. In light of this I'm asking only $600 for the unit, which is pretty cheap for a data logger with the most expensive sensors included. Please contact me on 0499988821 as this will be posted to multiple sites