-
Posts
18 -
Joined
-
Last visited
-
Feedback
0%
About miekaspop
- Birthday 29/08/1951
Contact Methods
-
Website URL
http://stevmail.wix.com/creative-media
Profile Information
-
Gender
Male
-
Location
Springwood NSW
Profile Fields
-
Car(s)
NM35 ARX-FOUR
-
Real Name
Stephen
miekaspop's Achievements
-
Very clean C34, Pearl white opposite Penrith hospital about 12 pm today heading towards M4
-
Maybe try this http://www.munchdesign.com/sau/stagea_unicorn.eps.zip
-
miekaspop started following Stagea Logo
-
Also the Nissan Qashqai keys will fit M35, however they wont take the chips the internals are not made for it. I also have one and it was a bit pricey to have cut at $22 You can also get these flip keys from Ebay for about $8
-
miekaspop started following Badge , Flip Key and $T2eC16ZHJG8E9nyfoTi6BP8)SW0B!w~~60 12
-
You can get this key and have it cut. Will only cost $6.90 for the key. I have one with the chip from a M35 key that I got from Yahoo Japan via Import Monster, and works after it was reset to my car. All up cost about .....$6.90 Ebay key......$11 for key from Japan with chip that I needed,......$36.59 to get key here from Japan......$8 to cut Ebay key......Grand sum of $62.49 for a working key http://www.ebay.com/itm/180920380436?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
-
Not so much a rare Stagea part, however was affixed to M35 grill
-
I got my second key from http://www.importmonster.com.au/order_view?id=23879 when it arrived from Japan put the internals into http://www.ebay.com/itm/170871691770?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649 http://www.aliexpress.com/snapshot/252972751.html First check that the key fits into the ignition switch, if so ...get it cut, then program it to the car. Any M35 key will program to the car. I also only recived 1 transponder for the immobiliser that was installed, however paid for one to come from England with details on how to sync both to the system and now everthing is good with 2 sets. If details are needed PM me.
-
miekaspop started following Key Required For My M35
-
When I eventually do it, I will be sure to let you all know. Thanks for the replys
-
Hoping that it’s as simple as it looks. I have removed the interior liner from the tailgate of my M35 and found where I suspect the reverse globes is situated. However, on removal of the rubber grommet I’m unsure of the correct way to get the bulb housing out as it can’t be seen. Do not want to be forcing anything.....Need little fingers and hands like Japanese, so as I can feel what is really happening inside that cut out. Thank you in advance for any one that could help or advise how they have done it.
-
Thanks, I will try that.
-
Hoping that it’s as simple as it looks. I have removed the interior liner from the tailgate of my M35 and found where I suspect the reverse globes is situated. However, on removal of the rubber grommet I’m unsure of the correct way to get the bulb housing out as it can’t be seen. Do not want to be forcing anything.....Need little fingers and hands like Japanese, so as I can feel what is really happening inside that cut out. Thank you in advance for any one that could help or advise how they have done it.