Jump to content
SAU Community

stig0000

Members
  • Posts

    57
  • Joined

  • Last visited

  • Feedback

    0%

Profile Fields

  • Car(s)
    r32 gtr

stig0000's Achievements

Contributor

Contributor (5/14)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

7

Reputation

  1. power-fc for rb26 sute r32-r33 , comes with EL hand controler, screen on controller some times is dull like the back ground LEDs ant working, dosent effect running at all, pick up sunshine coast, or can box up for postige that you payfor, $550
  2. dosent the stock det block at squrters?
  3. Ok, so we are realy gona work on the head, clean it up, up the comp, and leave standed cams with addjusterbal gears, going to set the gates up so they open at the last second and control the gate flutter with EBC, and plenty of tune time on cams and mid range, also looking at e85 options, Lighten flywheel, stanless dumps and front pipe, are the stanless manifolds worth wile? Or port match the factory and head rap?
  4. yer rhdjapan, it got posted yesterday, couldent find one anywere in aus,
  5. The extra cost to make a 30 block work in a bnr32 would allmost be more then the stroker, from what iv come across, And wanting to keep 26,
  6. since it has been a killer to find a stock crank iv allmost layed down my hard $$ for a strocker, tho realy couldent convince my self the 5k+ for it, id rather 5k for a dog box, then a strocker,
  7. hoping for 8.5c/r, or slightly higher, , going to tidy up the head, also now have good dumps and front pipe, zorst is a 3.3/4" all the way to the rear, tho probly going to go side pipes for this im also trying to find a good excuse for cams for a sweet rb26 idle , also a good tune is in order, as i think my old tune was sweet top end tho nothing to get it there,
  8. well this is old , come along way since then, engine is striped down, getting 87mm wiseco pistons as no6 piston took one for the team, im going to pumping the boost into this set up, just wating for a spanking new crank to turn up then rebuilt time, ( had been ground to much in the past) responce is my aim for this, i now have adjusterbull cam gears, still running the -7s( going to set 15psi gate press, then up with a eboost), what cam deg/lift would be a good combo for this? looking to run around the 20-25psi range with flowing mods,
  9. im heading down aswell, leaving thersday i think, sunshine coast
  10. im in need of a rb26 crank, must be in perfict con sunshine coast to briz area, cash ready,
  11. I have a evo 8 with about 250kw, very qwick responsive car, my gtr is faster in a strate line tho around a track, im sure the evo would win, oh its for sale aswell? the evos are a great car tho, i just cant keep both
×
×
  • Create New...