Rb26 Turbo Upgrade, All Dyno Results

[tricstar]

this is the engine that Allan (SLY33) built after he started this thread, mine now just had a very conservative tune at 18psi and made 526rwhp, will turn it back up to 25psi soon and repost results..

HKS step2 2.8 stroker, full counter crank and rods kit, CP pistons.

Brand new head from Nissan, Jun 272 in and ex cams, 10.8mm(?) lift, special retainers and all the jazz needed to support the cams and high revs, heads extensively ported.

Big dollar hypertune plenum and single throttle body setup

Custom alloy breather tank etc

Jun oil pump, N1 water pump, cant recall the brand of balancer, but its a good one.

Trust sump extension.

Turbonetics GTK-850 turbo and big Turbonetics external gate

OS Giken 2 way front diff

OS Giken cross mission 5spd gearset with input shaft 800+hp rated, quick shift kit

OS Giken triple plate clutch 800+hp rated

Carbon fibre super lightweight tailshaft (not currently fitted)

ATTESSA system fully inspected with all fluids changed

V-Spec active rear diff

engine made 760HP on engine dyno at ~25psi with screamer pipe

Current street setup with wastegate plumbed back into HKS 4inch exhaust

Huge alloy radiator, disgustingly thick Trust intercooler.

Fuel system to cater for 1000hp, in boot setup as in pics,

1000cc HKS injectors,

HKS fuel rail,

splitfire coilpacks

Motec M800 ECU

[walkda26]

R32 GTR

pod filters (do they actually add any power???)

cat back exhaust (3" one muffler)

10 psi boost - stock turbos

other wise completely stock

206kw atw More than I expected.

[SiR_RB]

93 R32 GTR

M's pod air filters

stainless steel front pipes

3" x-force hi-flow cat

3" HKS Legal cat back exhaust

profec b @ 14psi

205kw @ four wheels (mainline dyno @ Boost Bitz dyno day today)

forgot to ad:

180km/h @ 6020rpm (stupid standard ecu speed cut) still had 1500rpm's in her

time for an aftermarket ECU

[MrWindsurf]

My R32 made 222.6kw at all 4 on RE Customs dyno at the last dyno night.

Mods:

Boost restrictor removed - (Running 1Bar)

3in Fujitsubo Jasma Catback

De-Cat

Nismo Computer

[GTR-Dad]

Updated tune. Degreed cams. 3 degree intake and 10 degree exhaust correction expanded torque curve like a balloon. Torque comes on 200-300 rpm earlier, bumps peak from 330 ft.lb (445 Nm) up to 425 ft.lbs (575 Nm), and drops off less at 7500 rpm.

Power at the wheels on a DynaPack 4 wheel dyno bumps from 390 WHP (290 kW) to 527 AWHP (393 kW) at 17.5 psi on my boost gauge and 16.5 psi (corrected for atm conditions) on the dyno.

Setup is:

VEHICLE: 1989 GT-R

ENGINE: RB26DETT, 88mm bore, CR=8.7:1

MILEAGE: 20,000 Kms or so on engine

OIL/WATER PUMP: Nismo/OEM

OILING SYSTEM: Tomei Orifice, Tomei pan baffle, Greddy oil cooler and filter relocation

INJECTORS: 600cc Nismo

FUEL SYSTEM: Bosche 044 in-tank

TURBO SETUP: twin GT2860R-5

MAP or MAF's: MAP

INTAKE SETUP: Apexi Power intake, HKS hardpipes

INTERCOOLER: HKS

VALVETRAIN: JUN 264/264 9.7 mm lift - adjustable gears - Timing set to JUN spec

HEAD WORK: Intake mildly ported and left rough, exhaust opened up about 15% and polished, combustion chamber polished

EXHAUST: HKS dumps, Tomei DP, 85 mm HKS Priest

BOOST LEVEL: 1.2 bar = 17.5 psi - Blitz Dual SBC Type R

ECU SETUP: ViPEC Speed Density

[pistol-pete]

Just replaced stock turbos with -5s. wasnt a planned upgrade so the car is still mostly stock engine wise.

Car: '97 R33 GTR Vspec

Mods:

GT2860R-5 x2

Blitz Nur Spec front pipe

De-cat

Tanabe 3" cat-back

Apexi pods

Hard piping kit

Car is all stock apart from that, still running stock boost too. tried removing the restrictor but then the fuel pump was getting maxed out so leaving it in til i get the chance to do some more supporting mods.

now makes 255.8rwkw

[BIT SUS]

95 R33 GTR

fresh 26 from 260RS

120,000kms

Nismo fuel pump

sard 700cc injectors

Trust drag cooler

Garrett 2871-10 turbos (GT-RS)

HKS dumps, JJR front pipes, decat, and Kakimoto exhaust

Apexi pods

powerFC

333.7rwkw @ 18.5psi

[Bunta]

Freshly Rebuilt RB26

VEHICLE: 1989 GT-R

ENGINE: RB26DETT

MILEAGE: About 1500km on the engine

OIL/WATER PUMP: Billet gears in Stock housing/N1

OILING SYSTEM: Tomei pan baffle and restrictors to the head

INJECTORS: 700cc Sard

FUEL SYSTEM: Unknown in-tank

TURBO SETUP: twin HKS2510

MAP or MAF's: MAF

INTAKE SETUP: Apexi Power intake

INTERCOOLER: ARC

VALVETRAIN: Tomei Poncams and adjustable gears

HEAD WORK: Lightly ported

EXHAUST: Greddy 'extension' kit and then 3.5 inch straight through to some generic cannon

BOOST LEVEL: 17psi

ECU SETUP: Power FC with z32 AFMs

POWER: 301kw

will post up graph when i get it!

[Count Grantleyish]

Hi all,

Couple of people have PM'd me asking me to put up the dyno sheet.

R33 GT-R.

HKS GT-SS

Apexi Power FC

HKS 3" front pipe

3" Gutted cat

3.5" HKS cat-back exhaust

HKS pod filters

302rwkw at 18.6psi (controlled by HKS actuators, no boost controller).

I reckon I could go further, just need fuel pump, injectors, Nismo AFM and boost controller.

Hope these are much of a help in your turbo selection.

[BIT SUS]

1995 R33 GTR

standard internals

HKS GT-RS

sard 700cc

PFC

Apexi pods

3" straight pipes

Nismo pump

Profec B

PPG gearbox

335rwkw @ 18.5PSI

[NITTO R34]

Freshly Rebuilt RB27

VEHICLE: 2000 R34 GTR

ENGINE: RB27DETT - Nitto RB27 Stroker Kit with Nitto I-Beam Rods, Nitto Billet Full Counter Crank & Pistons

MILEAGE: About 300km on the engine

OIL/WATER PUMP: Nitto Oil Pump, N1 water

OILING SYSTEM: 9L Sump, sump breather, baffles, restrictors to the head

INJECTORS: ID2000cc x 6

FUEL SYSTEM: 2x Magnafuel protuner 750 pumps, sard lift pump

TURBO SETUP: Garrett GT4718R

MAP or MAF's: MAP

INTAKE SETUP: K&N Pod

INTERCOOLER: Apexi 150mm thick

VALVETRAIN: Tomei Type C springs, oversize valves, custom cams

HEAD WORK: Extensive portwork

EXHAUST: 5" Dump pipe, 4" cat back, 4" oval muffler, 4" cannon muffler

BOOST LEVEL: ~35psi

FUEL: Sucrogen (CSR) E85 (108 octane)

ECU SETUP: Autronic SM4, Autronic CDI

POWER: 1014hp @ rears, 970hp @ 4 wheels.

Tuned By Mercury Motorsport

http://www.youtube.com/watch?v=Cx__4Y4rIB8

Edited August 31, 2010 by NITTO R34

[GMASTR]

R32 GTR RB26DETT ON E85 TUNED BY JEM 380KW (500HP) 950NM TORQUE ATW,

HKS 2530 TURBOS,

3"EXHAUST,

APEXI POWER FC,

STANDARD INTERNALS,

STANDARD R34 INTERCOOLER, STANDARD PIPES,

STANDARD EXHAUST MANIFOLDS, STANDARD PLENUM,

STANADRD INTAKE PIPES,

RB20 AFM'S,

DRIFT STAINLESS AIR FILTERS,

http://www.youtube.com/user/GM45TR

[ash-s13]

1995 R33 GTR - 81,000kms

Unopened motor.

Garrett GT2860R-7 Turbos

Adjustable Actuators

16psi - a VERY safe tune to preserve engine life.

Apexi super suction kit.

Blitz FMIC

Full 3" titanium exhaust

New spark plugs

Oil cooler + catch can

Power FC + Hand Controller

Adjustable Cam Gears

284.8rwkw - which is somewhere around the 260awkw mark.

Makes full boost around 4000 rpm, and sounds incredible. No turbo kick, just smooth increase in power all the way, great for all types of driving.

Would highly recommend this setup to anyone with a budget.

Thanks to the guys at Racepace, Bayswater VIC

Edited September 14, 2010 by ash-s13

[lav]

1995 GTR33

she made 264.6kW on stocked turbo and engine

Mods :

- Power Fc

- Cam Gears

- Highflow 3 3/4 inch exhaust

apart from that, all stock.......

[gtrgsxr]

1995 R33 GTR - 110,000KMS

Stock everything except splitfire coilpacks.

stock boost.

193.4awkw

[johnnyt]

R32 GTR

ENGINE

built engine

stage 2 hks 272 cams

hks cam gears

TO4Z Garrett

6 boost

48mm turbo smart gate

twin z32 afms

fuel system

sx fuel pump

1450 fuel injector clinic

sard reg

tried running 60% methanol 40% bp 98

managed to pull 560hp at 1.5bar until fuel system ran out of puff, spewin i wanted to wind it up too 26psi. it ran 527 at the same boost on pump but the car does feel stronger through the middle now

will finish of this drum off methanol and give either e85 or a e50/e70 tune a go

[tricstar]

Just had another tune, heres the set-up

HKS step2 2.8 stroker, full counter crank and rods kit, CP pistons.

Brand new head from Nissan, Jun 272 in and ex cams, 10.8mm(?) lift, special retainers and all the jazz needed to support the cams and high revs, heads extensively ported.

Big dollar hypertune plenum and single throttle body setup

Custom alloy breather tank etc

Jun oil pump, N1 water pump,

ATI balancer

Trust sump extension.

Garrett TO4Z .84 rear, turbo and big Turbonetics external gate

OS Giken 2 way front diff

OS Giken cross mission 5spd gearset with input shaft 800+hp rated, quick shift kit

OS Giken triple plate clutch 800+hp rated

wastegate plumbed back into HKS 4inch exhaust

Huge alloy radiator, disgustingly thick Trust intercooler.

Fuel system to cater for 1000hp,

1000cc HKS injectors,

HKS fuel rail,

splitfire coilpacks

Motec M800 ECU

@ 25psi made 680awhp on a hub dyno (so probably about that at rwhp ? ) what ever it is it comes on hard,

[t04z]

300rwkw r32 gtr

hks t04z turbo straight throught 3" exhaust

660cc injectors

nitto oil pump

forged pistons

040 fuel pump

intercooling and piping

apexi afc neo

15 psi boost

maxed my fuel pump am getting new one and 3.5" exhaust soon then will pump it up to 20 psi should start making some good numbers then

[El_Mutto]

1989 r32 gtr

Fresh built motor with forged bottom end and r33/34 crank.

r33 N1 turbos (Rebuilt)

N1 oil pump

N1 water pump

Sump baffle

aftermarket front pipes

3 inch exhaust

Power FC

1.5 bar boost

313rwkw

[tricstar]

Just had another tune, heres the set-up

HKS step2 2.8 stroker, full counter crank and rods kit, CP pistons.

Brand new head from Nissan, Jun 272 in and ex cams, 10.8mm(?) lift, special retainers and all the jazz needed to support the cams and high revs, heads extensively ported.

Big dollar hypertune plenum and single throttle body setup

Custom alloy breather tank etc

Jun oil pump, N1 water pump,

ATI balancer

Trust sump extension.

Garrett TO4Z .84 rear, turbo and big Turbonetics external gate

OS Giken 2 way front diff

OS Giken cross mission 5spd gearset with input shaft 800+hp rated, quick shift kit

OS Giken triple plate clutch 800+hp rated

wastegate plumbed back into HKS 4inch exhaust

Huge alloy radiator, disgustingly thick Trust intercooler.

Fuel system to cater for 1000hp,

1000cc HKS injectors,

HKS fuel rail,

splitfire coilpacks

Motec M800 ECU

@ 25psi made 680awhp on a hub dyno (so probably about that at rwhp ? ) what ever it is it comes on hard,

ok heres the latest,