Jump to content
SAU Community

Rb25 Turbo Upgrade, All Dyno Results


Recommended Posts

With so many threads about turbo upgrades for RB25's i thought itd be a good idea to start a thread that shows results only, as the results from various threads are scattered everywhere. Everyone has there own ideas about what power they want so obviously there isnt ONE perfect turbo upgrade for everyone.

Please post your RB25 dyno graphs only and state the following:

-Engine management

-Boost ran

-Fuel used (pump or special)

-significant engine mods (eg cams)

The idea of this thread is to be a quick reference to various turbo's performances on RB25's, not to be a discussion thread.

Thanks

(If this has been done already let me know, but didnt come up one in search.)

Check (if you live in usa): Costco Weekly Ad, or Supercheap Auto Catalogue.

Link to comment
Share on other sites

:werd:

And does someone have a rb25det hi flow dyno result that they would also like to elaborate a little bit more on.

I dug this up from an old thread heres the thread with talk on the hks2535,2540 & 3037.

Click me

And here is the hks test chart for 2510,2530 on rb20det and the rest 2535,2540 on a R33 rb25det.Very interesting and has helped me to answer some of my quetions.All tests are done at 1 bar of boost.

Click me

There is a larger range than that there too with tests done on other cars as well.

Link to comment
Share on other sites

here is my dyno results

mods

3" exhaust

pod filter

10psi boost

safcII

FMIC

BP Ultimate 98

stock standard turbo

We had an idling issue last week and to fix it the boys had to mess with the safc,

after getting the car to idle she ran 285hp but i didnt get a printout so i guess for this exercise i have 273hp

Link to comment
Share on other sites

221RWKW mongrel unknown spec turbo from Rigoli.

The build consisted of:

Arias Forged Pistons 1.0 mm OS (1300)

GTR rods with fresh bolts (400)

ACL heat treated race bearings (120)

Balance, clean and O ring block etc. including straighten of crank and lightening. (1100)

GTR fuel pump (180)

Malpassi Rising Rate fuel reg (120)

Standard head gasket (90)

Hybrid Monster FMIC (700) piping (120) new Mig welder (700)

Autohouse Tsukasaki PFC (secret)

Dump and front combo 3" with Fujitsubo "Jasma" 3" stainless system and racing cat also fitted.

Click Here for dyno sheet

  • Like 1
Link to comment
Share on other sites

Engine management - PFC

Boost ran - 1.4 Bar

Turbo - Garrett GT30

500cc injectors

Bosch 044 pump

HKS EVC 3

45mm Turbosmart External Wastegate

Custom Made Steam Pipe High Mount Turbo Manifold

Z32 80mm Air Flow Meter

HKS 600x300x76 Tube And Fine Intercooler

Custom 3inch Exhaust

HKS adjustable exhaust cam gearstock

etc etc etc

Fuel used - BP Ultimate

Stock Internals

The dyno graph i have is from MAS 04 as i cant find the selectamaz one where it went 324rwkw on a nice cool exterior located dyno.

  • Like 1
Link to comment
Share on other sites

1994 R33 GTS25t

Avcr - 0.8bar

Full zorst

Trust IC

Standard Turbo

Standard Ecu - no tuning or piggybacks

Automatic gearbox

180.3 Rwkw

Good strong power curve :burnout:

This was bout 3 months ago, shes a little different now :)

Link to comment
Share on other sites

not home atm so cant post up dyno

1995 gts-t r33

turbo back zorst with hi flow cat

pod+ cai

hybrid fmic

10psi

stock turbo

stock ecu

optimax fuel

hybrid bov

173rwkw on a 29 degree temperature at 7:30pm lol about 6 months ago was last dyno

new results in a week with power fc, avcr (12psi), z32afm

ben...

Link to comment
Share on other sites

1994 GTS25t

Hybrid TO3/TO4E (high flowed too - back cut ex wheel etc)

CP Forged pistons (8:1 CR)

Grex 1.6mm HG

ARP rod bolts

Port matched manifold

550cc inj and custom top feed rail

Malpassi reg

044 pump

K&N and custom inlet piping (nil AFM)

LT12 Microtech

FMIC

HKS EBC

Full 3" exhaust

The list could go on a LOT longer!

Also now have HKS cams (256 / 264)

Dyno pre HKS cams

Boost - Drops away to make peak power of 299.1rwkw @ 1.3bar

Dyno post HKS cams

Boost - Drops away even worse now! 270rwkw @ 1.1bar

Wanted - more $$$ to get a bigger turbo, run 1.5bar and make 300++rwkw :)

Link to comment
Share on other sites

1995 gts-t

Stock turbo

pfc

gtr fuel pump

adj fuel press reg

3'' catback exhaust

ebc

Pod filter+partion

Small Hks front mount

Slipping stock clutch,leak in header/exhaust gasket.Cant remember what boost it ran...

12:1 afr's

182.0rwkw

:chop:

Link to comment
Share on other sites

R33 gtst

Series 1

Stock turbo

Custom Dump pipe (Seperate wastegate pipe blended in), Hi flow cat manderal 3''

Stock ecu

Blitz LM cooler

8psi boost

K&N panel

Shootout mode dyno dynamics 175RWKW

Leaning out so couldn't rev out

AFR's went to 13.1 so backed off at 4900rpm

Will dyno in jan with pfc, pfc boost controller, upgraded fuel pump/nismo press reg.

This thread is great!

Link to comment
Share on other sites

gcg st.1 450hp high flow turbo . gtr front mount cooler

aftermarket manifold, ces racing 3inch split dump, 3inch cat and exhaust.

link ecu, malpassi rising rate reg.

stock internals and stock cams.

224rwkws at 17.5psi, with more power to come just need new coil before i can run more boost. 224rwkws at 1.2bar shootout mode, dont have scanner to post sheet.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Candid connections: Platform for casual relationships Authentic Maidens Supreme Сasual Dating
    • I would absolutely be starting with this idea over all other possibilities. It sounds f**ked.
    • Lighting in the shed looks real good! Not lying, have shed envy lol. Maybe one day I can fk off from Metro Sydney.
    • I would be cautious with those 2000/2200 CNG injectors, swap them out for a set of 1550 aka 1650 Bosch stainless ones before you take out a motor.
    • I tested them all a couple times, haven't tested it warm or wet though. The only seemingly really weird thing was the cylinders plug closest to the dash was pitch black nearly.  Doesn't smoke out of the exhaust or anything.    Also sorry everyone for the very late response. Got busy with work and all and didn't get around to fooling with the car for awhile.  But an update! I figured out the cause of the lean condition, my intercooler had at some point exploded or something. It's clearly separated in a spot with black oily buildup around the leak, and multiple leaks in various vacuum lines. I've replaced it and the vacuum lines, and gotten new clamps and there are 0 leaks now after doing a couple smoke tests.   The car now runs significantly better and the exhaust doesn't overheat anymore. I still have the main problem though where the engine feels like I'm lugging it around sub 3500rpm in any gear besides 1st, 2nd It's less noticeable but 3rd anything under 3.5k and I need to downshift or the engine is clearly struggling when trying to accelerate at all, 4th is the exact same, sub 3.5k engine won't accelerate and its hard to bring it back up to speed, 5th gear doesn't feel like the car is going to straight up fall apart now but it still can't pull 5th. It slowly loses speed and rpm and ANY gas I give I can feel the shakes from the engine and it slowly dying. If I ever so lightly give it gas it will slowly and nicely decel till around 2k rpm instead of lugging. But it cannot accelerate at all or maintain speed.   If I go from first gear at 5 or 6krpm and then shift to second it also feels like it's struggling to make power till above 3krpm if trying to accelerate but I can cruise around parking lots at around 1-2krpm just fine in 2nd. It's just when accelerating hard it and changing gear you really notice it die down.  But even if you shift at way lower rpms it does the same thing till somewhere above 3k.  As far as I'm aware it's got r32 gtr transmission gear ratios with gts4 diffs. The tire size is 205/55r16 91h Above 3500rpm the car pulls and runs and drives quite normally and the power from engine sounds and feels very smooth.  It's perfectly driveable at above 3.5krpm but I drive on the highway alot for work and it gets really bad gas mileage in 4th at 4.4krpm. Not that I'm looking for great gas mileage with such a car, just I'm sure being at around 3krpm would be significantly better for it.    Have appreciated all your guys help. I do understand the engine may just be f**ked from running with a boost leak though.    One final thing I'd like to add is I'm only shifting so high in the rpm range is because if I don't I will feel the engine lugging bad with 0 power in lower rpms, pretty much anytime off boost trying to accelerate it feels really bad.  Also when I say 3500 rpm I don't mean exactly. Just around there. 
×
×
  • Create New...