Jump to content
SAU Community

Sau Vic Club Permit


blah_blah
 Share

Recommended Posts

We are pleased to announce that Skylines Australia Victoria is now an approved Car club to be registered in the Vic Roads Club Permit Scheme.

In order to implement the Club Permit for our members a few ground rules needed to be set to ensure that there is no abuse of the privilege, as any misuse will result in the entire club & its members being stripped of eligibility.

Conditions are as follows:

1. Be a SAU VIC Financial member for at least a year

2. Attence of 4 club events per year. A club event is defined as:
a. Deca
b. MS Championship
c. Show N Shine
d. Any members only events
3. No RWC required. However a club official (exec) will inspect the vehicle for:
a. occupant safety
b. pedestrian safety
c. noise
d. mechanically sound
e. suitability for vehicle to driven on the road
d. approvals will be at the discretion of the official (exec)
From VIC Roads:

Conditions of use
VicRoads may suspend or cancel a permit if the permit holder fails to comply with the permit conditions or engages in conduct which threatens public safety or undermines the integrity of the permit scheme.

  • Club Permit vehicles can be used at any time for any purpose other than for the carriage of goods or passengers for hire or reward. Permit holders are not restricted to club sanctioned activities when using their vehicles.
  • The vehicle that is being driven on a valid Club Permit must be maintained in a manner which ensures that the vehicle is in a 'safe condition' for use on a highway.
  • A logbook must be carried in the vehicle, or on the rider (in the case of motorcycles), at all times the vehicle is in use. On each day of use, a logbook entry must be made prior to the vehicle being used (unless the vehicle is within 100 metres of the garaged address).
  • Ensure that the Club Permit number plate(s) and windscreen label as issued by VicRoads are correctly displayed on the vehicle at all times.

Applying for a club permit
To apply for a Club permit you will need to complete a Club Permit Application form together with:

For More information: http://www.vicroads.vic.gov.au/Home/Registration/PermitsModificationsAndDefects/OtherPermits/ClubPermits.htm

There may be some minor details so I will update this post or thread as we progress with the implementation

Link to comment
Share on other sites

Good work Tony on making it happen. I'm sure there will be number of people jumping on the opportunity to make their car club rego'd.

I've one question, about inspection by club executives, what sort of 'qualification' do they require to have before doing inspection of cars? (That question is just to satisfy my curiosity, feel free to PM if you don't want to share the answer publicly).

Link to comment
Share on other sites

Good work Tony on making it happen. I'm sure there will be number of people jumping on the opportunity to make their car club rego'd.

I've one question, about inspection by club executives, what sort of 'qualification' do they require to have before doing inspection of cars? (That question is just to satisfy my curiosity, feel free to PM if you don't want to share the answer publicly).

No qualification guidelines have been set by Vicroads that I have been advised of. Its more of a self-assessment system. Make a reasonable assessment by those that are authorised by the club.

Link to comment
Share on other sites

I've been waiting for this. I was going to sign up with another club so I could get club reg but now now I don't have to go anywhere.

I take it the 25 year rule still applies?

Also, where will the vehicle assessments be done?

Is there a contact number for the person that will be going over the vehicles so we can find out what will pass and what won't?

Link to comment
Share on other sites

will this get us access to historic plates????

historic plates???

these are jsut the standard club plates:

  • Number Plates

    Club Permit plates have white characters on a maroon background.

    When submitting your Club Permit application at any VicRoads Customer Service Centre, in most cases you will receive your number plates on the spot. If you submit your application by mailing it into VicRoads, you will have to wait for the delivery of your number plates.

    Custom plates cannot be issued to a vehicle on the Club Permit Scheme.

Link to comment
Share on other sites

and from a few messages received.

No this is not a way to get your stripped out heavily modified track only car

or your defected Drift car back on the road.

oh and no compliance plate..we cannot help you.

these cars do have to be Safe and basically close to roadworthy

remember we are going to be sharing the road with them.

And remember you will be even more representing the club whilst using this system.

and EPA is separate to to rego so there no getting around that...

it's more for the person with a nice clean car who does not drive it much and looking for some cheaper rego on it.

Link to comment
Share on other sites

In addition for modified vehicles, it isn't that easy you till need a VASS certificate:

Link to comment
Share on other sites

Cheers mate. It's a fairly standard car other than the half cage, which I'm fairly sure is still legal so long as the car is registered as a 2 seater.

I'm also pretty sure fixed back buckets are legal so long as they are FIA approved.

Are you able to provide some info on who will be doing the checks and where?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • The 4WD version is harder to find so I compared the parts diagrams of the two https://nissan.epc-data.com/stagea/whc34/5414-rb20de/engine/172/17453/ and https://nissan.epc-data.com/stagea/wgnc34/287-rb26dett/engine/172/17201/ seems like the same part is called out: 17201...what with WHC34 tank work?
    • Thanks man, car is registered! Time to enjoy it. But if anyone has questions let me know happy to help others avoid my pitfalls.  
    • 2.8L Stroked S1 RB25 Fully built block (Spool&CP) and head (Ferrea & Kelford 272's). Hydro lifters.  Precision 6466 Gen2 1.00 T4 Divided. 2x 40mm Turbosmart open dump gates.  DW 1200cc injectors 2x AEM 320LPH Pumps Haltech Elite 2500, IC7, WB1, TC8, Etc.  4" Downpipe, 3.5" Catback.  94AKI (101.5ron) Pump gas + WMI (2x 1000cc nozzles) 463rwkws @ 27psi on a mustang roller dyno. 
    • I finally got it on the dyno today and luckily it stayed in one piece! It wasn't without its dramas though. First off, sent my power steering belt to the moon around the third pull. Scared me half to death. Tuner laughed and mentioned that often happens with RB's... I may need to look into adding the Ross power steering idler, or something a long those lines.  Second issue that came up was about 2 hours in, we realized the VCT wasn't working and had to go back through the timing and knock threshold once it was fixed (I had botched setting up VCT). That waisted a good hour or so. I was surprised to see that with VCT working, we saw a ~38rwkw difference across the powerband. More then I would of expected.  Without further ado, made 463rwkw@27psi. Not the numbers I originally set out after, but still more then enough to kill myself and I'm very happy. Mustang roller dyno's are known to be heart breakers compared to other dyno's. Two things that limited me, first was the hydraulic lifters/7600rpm cut. Tuner was adamant that I was losing out on a lot of power up top because of it. Second was the pump gas & WMI. He wasn't 100% comfortable tuning with WMI, and was honest about it. He stated he's more confident on E85/Race gas. I look at this as a positive as it leaves me a lot of room for improvement. All in all, very happy! I need to see what I can do about that rev limiter... I use to rev my stock RB20 to 8000rpm and now I have a fully built head that I only rev to 7600... It's bugging me.  Don't mind my fantastic picture/filming skills.  RB28 - Dyno (1).mp4      
    • The Daily - 2011 Audi A5 And the camper VW transporter T5          
×
×
  • Create New...