Jump to content
SAU Community

18 X 10.5" Te37Sl And Te37Sl Black Edition, Yokohama Ad08 Tyre Package


Recommended Posts

Hi Guys,

I have one set of each of these in stock right now, brand new and ready to pickup or ship.

18 x 10.5" +15, 5 x 114.3 PCD RAYS Engineering Volk TE37SL


$3300.

http://www.importmonster.com.au/shop/product_info.php?products_id=1764

-------

18 x 10.5" +15, 5 x 114.3 PCD RAYS Engineering Volk TE37SL Black Edition

$3300

http://www.importmonster.com.au/shop/product_info.php?products_id=1763

-------

I have limited stock of brand new Yokohama Advan AD08 tyres, brand new current stock from Yokohama Australia (not parallel import old stock)

$380 per tyre, fitted and balanced.


Package deal for either set of rims above and 4x 265/35/18 AD08 for $4700 = a further saving of $120.

These are all in stock and ready to go :)

Cheers


Aaron


post-58515-0-36075000-1373350879_thumb.jpg

post-58515-0-95367200-1373350897_thumb.jpg

post-58515-0-02419400-1373350910_thumb.jpg

Link to comment
Share on other sites

 Share



  • Latest Posts

    • Never cheap out on brakes, tyres, suspension. I learnt the hard way at Oran Park lol
    • You got your answer when everything was OK after disconnecting your return line from the FPR. Why in the world are you running a 460, 2200CC injectors, etc. on stock 8mm lines?  Keep the pump, ditch the lines. I used both 8mm lines as my feed and one of my Hicas 10mm lines as return. 
    • Also to note, in the Subaru world, Whiteline endlinks have been reported to break... often. So going Hardrace or GKTech would be my option.
    • Hi all. I had to chamge fuel pump due to car sitting for 10.years and went the 460. From memory it had the slightly smaller walbro in it previously. Running bosch 2200 injectors and a turbosmart compact fpr. Problem is no2 I can't get base pressure below 70psi. If I disconnect return line from fpr pressure drops indication restriction. I've inspected.the fuel line and removed the pipe on return line in tank and no chamge. Surely I'm not the only o e using stockings on a 460? Could the fpr be too small to handle the flow of new pump ? I'd like to sort it rather than going back.to smaller pump.
×
×
  • Create New...