Jump to content
SAU Community

New * Walbro * 255Lph In-Tank Fuel Pump Gss342 + Fittings - $115 Incl. Delivery


Recommended Posts

Genuine WALBRO 255LPH Fuel Pump GSS342 + Fittings


- Most commonly used 38mm in-tank performance fuel pump
- 255LPH @ 3 BAR
- Genuine WALBRO – manufactured in USA with original packaging
- Very popular in-tank pump upgrade for Skyline's (practically straight drop-in)
- Includes 2x strainers and fittings as pictured

$115 incl. Delivery >> SAU Special

BUY_BUTTON.gif

* This is an Australian delivered product with a national warranty.

Offset GSS341 also available @ same price on request.


GSS342_350.jpgGSS341_350.jpg

COMES WITH THE LOT FOR A QUICK INSTALL

Link to comment
Share on other sites

sorry new at this, how much power is this one good for and whats the difference between internal and external apart from the obvious.

Hey,

It's rated for around 300-400HP, so more then enough for most applications.

In most cases vehicles are fitted with one internal fuel pump which inside of the assembly, so if you are looking for a quick fuel pump upgrade that will be your best bet.

You can purchase an external fuel pump which are usually larger unit's but required modifications.

What are you planning to fit this too?

Hope that helps,

Brendan

(VM)

Link to comment
Share on other sites

r33 gtr and plan on having 450-500 mark do you have one suitable for that range?

Hey,

Go with the E85 Walbro unit - flows 460LPH which is the highest rate of any 38mm in-tank pump on the market today.

You can purcahse it here: http://www.skylinesaustralia.com/forums/topic/410989-all-new-walbro-460lph-e85-in-tank-fuel-pump-strainer-kit/

Cheers,

Brendan

(VM)

Link to comment
Share on other sites

  • 4 weeks later...
  • 2 weeks later...
  • 2 weeks later...
 Share



  • Similar Content

  • Latest Posts

    • Welcome to SAU Alex, do you have any pics of your car?
    • Hello everyone. Greetings from Spain to everyone. I am from the Canary Islands. I have a r33 gtst M type. I am fully involved in the project. In networks they know me as alex.typex. Youtube XXGarage. And I'm in the middle of programming my Apexi power fc. A pleasure to be part of this great community. Greetings.
    • Because it's rubbish, it got progressively better with each generation but still rubbish when you're pushing the car on the track. Some like it, most hate it.
    • Yeah, I presumed that the pic was of some other car, because of the F. Ikeya arms.
    • Did a little bit this afternoon and pulled the dump and turbo off so I could take the mani off to clean it up and give it a few coats of paint. Wire wheeled what I could get to and then got the sand paper out to get the tight spots. Gave it one coat so far, will do another two tomorrow and see if I can fit it in the oven to bake it for an hour along with the adapter and dbw.  Hoping the exhaust wrap I ordered turns up soon so I can wrap the dump and screamer. Ordered 30M so I'll wrap back as far as I can to help a little with temp next to the box and also the floorpan. 
×
×
  • Create New...