Jump to content
SAU Community

Huge Garage Sale, Full Of Fruit And Quality Parts!


Recommended Posts

For sale! Clearing out two workshops, need storage space back.

All deliveries can be made aus wide no problem.

All items in fantastic condition unless otherwise specified.

Lots more parts than listed, Ill keep updating this thread.

Photos available of all parts, dont waste my time dreaming though.

Photos and updates on facebook, add David Dennis, or by SMS/email.

Most items negotiable!

Located Devonport, Tasmania.

Phone Dave on 0409 631 092

--------------------

HKS 3037 aka GT3076R 56 trim 4 inch anti surge compressor housing with .82 AR T3 base flange 4 bolt dump flange

$1600 this is a saving of over $400

Hks by garrett with ceramic coated housing and gate pipe on housing for perfect boost control AND cheaper, better packaged exhaust manifolds. Perfect for RB, 1j, SR, 7m, 3sgte, 4g63, 2jz, anything. Push well into the 300rwkw barrier with insane induction noise. Highly reccomended by leading tuners such as Trent @ Status/Checkered Tuning and Donny @ Streetforced

0409 631 092, or David Dennis on facebook

http://www.turbobygarrett.com/turbobygarrett/catelog/Turbochargers/GT30/GT3076R_700382_12.htm

248488_10150393335074392_648679391_10533353_1163845_n.jpg

-----------------------------------

WHEELS

Skid rims for sale, 5 stud suit ford Silvia Mercedes etc, jap Ssr hasemi, 16x8, $200 pair.

285690_10150382639619392_648679391_10414823_56144_n.jpg

14x7-9 rewinds/superlights $400, 15x8-ish challengers $450. 4x114.3 No Tyres. Wheels in excellent condition.

301020_10150455040529392_648679391_11102800_1416627211_n.jpg

-----------------------------------

S13 PARTS

Boost controllers, manual T type, turbosmart brand mostly, at least 4 of them here, $20 each

S13 Square/J's Headlights $300

Passenger indicator/park light $30

302927_10150430826779392_648679391_10920426_7669707_n.jpg

S13 tail lights, excellent condition, one set tinted other standard

320941_10150430826644392_648679391_10920425_6386136_n.jpg

S13 front lower control arms, as new $160 pair

S13 drivers side Front guard, as new $100

Reco SR20 head, less than 800km, all reciepts. Have stock cams or hks cams to suit. $250

269668_191692727551353_185732901480669_447755_6933323_n.jpg

Perfect s13 fuse box cover $20

298756_10150419657579392_648679391_10806998_61327_n.jpg

SR20DET PARTS

S13 SR20 Redtop Power FC, two of, one with hand controller. $700 without, $900 with, the one with hand controller is basically brand new in box with all manuals etc.

320941_10150430826939392_648679391_10920427_3159730_n.jpg

S13 SR20 engine loom, perfect condition $200

307642_10150419655464392_648679391_10806956_3916737_n.jpg

SR Gearbox, perfect condition $550

SR20 Extreme Drift Clutch + Lightweight Flywheel, good condition, Retail 1600+ for the kit, sell for $800

321547_10150430825029392_648679391_10920409_6685074_n.jpg

SR20DET cast iron factory turbo manifold, as new low km, 4 of, $50 each

SR20DET .2mm oversize factory pistons, brand new in boxes, retail over 300 each, sell the set cheap for $500 delivered

----------------

LS1 S13 CONVERSION

Bolt in crossmembers, DAFT INNOVATIONS mounts and such for LS1 into S13. My own design Earls power steering line kit, earls/canton racing oil cooler setup size of a4 page, starter motor which clears the steering shaft etc etc. Not cheap, all parts brand new in boxes except for crossmember and mounts. ‎450 mount kit and custom crossmember. 200 power steering lines, 1000 oil cooler, 350 starter motor, also have fuel system lines and filters for 250, all earls lightweight stuff. Will not seperate.

-----------------

RB26 PARTS

R34 GTR Tomei Type A Poncams, 260in 252ex 9.15mm lift, brand new, justjap want 1400, sell for $700 delivered

RB26 Custom Made JE pistons, 86mm bore, made specifically to use factory rings, world reknowned for being the best rings available. Brand new in packaging, comes with pins and spiral locks and a full set of factory rings, most places selling for 1600+ bargain at $1100 delivered

R34 GTR N1 block, split bore, needs one sleeve then better than new! $1000 plus post

New wastegate actuators, details unknown but would be R34 or nismo items $25 each

R34 GTR PARTS

Nismo suspension bushes, purchased to suit R34, will fit other skylines/silvias. All new in box, find the part number u want and call me and ill tell you if i have it. Will sell half price of the best price u can find on the net.

R34 GTR N1 block, split bore, needs one sleeve then better than new! $1000 plus post

R34 GTR N1 Vspec2 front grill for bumper, brand new, not sure on value, must be cheap at $100 delivered

R34 GTR N1 side skirts, 2 peices per side, need paint but other wise good condition $300 plus post

R34 GTR N1 Carbon Fibre Undertray, Brand new never fitted, Cost over $9000, selling cheap, call for details.

R34 GTR 18" Wheel center caps, immaculate condition, set of 4, $100 delivered

R34 GTR Front Windows or Windscreens, One brand new, one used but as new, Cheap as chips, call for details, can send worldwide.

EVO 7 PARTS

Evo 7 Yellow Top Feed 560cc injectors $220 delivered

Evo 7 Factory shocks/struts/springs, as new, never done any work, refresh your old ones. $50 plus post

Evo 7 Ralliart Air Filter, new in box, $50 delivered

Evo 7 Timing Belt, new in box, $50 delivered

Evo 7 Synrorings/hubs $CALL

RANDOM PARTS

S14 series 2 front bar, looks good, brand new in white gel coat. Must sell ASAP! Make a decent offer

205990_10150409195844392_648679391_10703847_1963237_n.jpg

S14 Ganador Mirrors $100

281567_10150409196834392_648679391_10703861_6608770_n.jpg

Luisi 300mm and Personal 350mm wheel $100 each

308877_10150430826494392_648679391_10920424_7331631_n.jpg

1jz twin turbo setup, complete good condition $150

1jz stock clutch setup, complete good condition $150

4age ae86 radiator, excellent condition, looks new $100

4age rwd ae86 212mm flywheel and heavy duty PBR clutch, excellent condition never slipped on me, $200

RB20 fans, engine covers, power steering, alternators, crank sensors etc etc

CA18 Bellhousing - Free if picked up

E20 Van Bellhousing, good for L Series engines

Edelbrock 350 Chev Rocker Covers, Brand new in packaging, shiny shiny for your street machine, Beat any advertised price by 25%

Mallory 350 Chev Performance Ignition System, Unilite Breakerless, Part number 3748201, Brand new in box with a set of new blue top gun leads, will beat any advertised price by 25%

Powerbond 283ci to 350 chev small block v8 7" Street Crankshaft Dampener or Harmonic Balancer, Brand new in box, part number PB2221-ST, will beat any advertised price by 25%

Turbosmart Progate 45mm, as new with V band clamps

S14 SR20DET factory radiator $25

LS1 A/C compressor $20

VG30 Block, girdle and sump $50

CARS FOR SALE

1972 Triumph 2.5L PI (injected) complete car suit restoration, has engine and all running gear, two spare heads, two manual gearboxes, with one overdrive, all chrome trims immaculate, brand new door and Windscreen rubbers, shell is as it good as it gets, next to no rust, no damage. $800 or offers, keen to move, need shed space.

Widebody Sil80 rolling shell, widebody front and rear, fibreglass bonnet, bodykit, coilovers, all adjustable arms, can come with cobra seats or no seats, just add paint, engine+accessorys and gearbox. $3500 with seats, 3000 without.

For sale! Clearing out two workshops, need storage space back.

All deliveries can be made aus wide no problem.

All items in fantastic condition unless otherwise specified.

Lots more parts than listed, Ill keep updating this thread.

Photos available of all parts, dont waste my time dreaming though.

Photos and updates on facebook, add David Dennis, or by SMS/email.

Most items negotiable!

Located Devonport, Tasmania.

Phone Dave on 0409 631 092

Link to comment
Share on other sites

  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • G.G.C. (Gibier German Cook) restaurant in Motomachi in Kobe: A tiny 2 floor restaurant that was founded in 1976. The original couple who owned/ran it retired and sold the business to a corporation who pretty much tried to keep it the same as it was.  Lots of lesser known (to me anyway) German beers available.  Venison with vegetables. The meat came from deer from Hokkaido. The chef told us that there's a whole industry around the use of all parts of the deer from the antlers to the hooves. Sure enough, directly accross the street from this restaurant is a shop that sells all manner of utensils, clothes and objet d'art all made from deer skin, bones and horns.... also owned by the same corporation. The venison was super tender 😋 Various decorations, a lot of which were quite old, no doubt from the original owners. A nice pilsner too which I'd never seen before.  It's well worth a visit but check the opening hours, they're closed on Wednesdays, only open 11:30am - 3pm on Mondays and Tuedays, 11:30am-3pm for lunch and 5pm-11:30pm on Thursdays, Fridays and Saturdays, and 11:30am-3pm and 5pm-9pm on Sundays. Last order is 30mins before close.
    • Yep around 2m long or thereabouts.  I made another post in the photo diaries 17 years later lol. I swear it has not been that long!
    • Full results via link below https://docs.google.com/spreadsheets/d/1inu1mRRO0WjV2-3vGYsjnmYggVOzmApWOby68GwPGcI/edit?usp=sharing  
    • Have I not posted since 2022 ? wow... Yes, it's pretty much finished mechanically. I'll probably sell it soon as the old man is 80 in November, so 99% he won't ever drive it again. I don't really need 3 GT-R's and I haven't driven any of them since September last year - correction, drove my 33 earlier this year on Australia day. All of them have been like this since then.
    • So, after talking to Tyson at Auto Tech Engineering about my "cunning plan", he suggested to "not piss money away on stuff that the car probably doesn't need" (the max IAT at the end of the 1/4 ever only seen around 30°C, which is in no way a issue, and as such, for what I use the car for I really don't need colder IAT anyway The whole point of the "upgrades" that I thought about doing was that my IAT started creeping up from 25°C to 30°C when cruising, then drop back down, then raise back up, rinsing and repeating, it has never done that before, so after talking to FI interchillers they assumed that it was the Bosch pump starting to fail, and if I was going to replace the pump....... I would do my usual thing of "while where in there" But, Tyson said he has seen similar things happen to IAT with failing or leaking AC compressors on other cars with interchillers, and as the AC compressor is 22 years old it is probably well on the way out anyway, and if a electric water pump fails it stays failed and doesn't just speed up and slow dow, but if a AC compressor starts to fail or is leaking, it will fluctuate and give a typical result to the IAT He said he could test the compressor and see how it is functioning and pressure test the whole system, but, as I do, I've just got them to order a new compressor to install to start with, and do a AC service and see if that fixes the issue That way, if it is the compressor, I wouldn't be spending lots of coin on something that wasn't the issue, and not actually needed, as the stage 2 kit, and pump, comes in at around $2k in parts alone, not including the plumbing and other parts that will be required or labour  And apparently the Bosch pump I have is really reliable and well up to task for the flow/pressure requirements that I need to keep my intercooler and massive amounts of boost heat (7 psi LOL) under control giving a nice and cold IAT A big shout out to Tyson for this, not many people will talk a idiot out of wasting money on car modifications, and the saved car budget funding can be wasted elsewhere on things that I may, or may not, need, like a nice new leather SS interior with red stitching......maybe I can convince the Minister for War and Finances into a nice trip down to Victoria for a week away to see the sights (I'll explain that I will need a hire car once we're down there so we don't have to worry about the Commodore being parked up on the streets at night, and it just so happens there's a joint that I can store it during that time) $1680 for all of the interior trims, + installation cost (I'll ask for a quote to install the trim if the new compressor fixes the issue)   https://leatherseats.com.au/products/leather-seats-trim-skins-kit-to-fit-vt-vx-vy-ser1-ss-green-black-diy-install  
×
×
  • Create New...