Jump to content
SAU Community

New Nissan Skyline R33 O2 Oxygen Sensor - $59 + P&h


Recommended Posts

PEC Australia Oxygen Sensor

Direct-fit 3 wire

*NGK OZA395-E2 equivalent*

91-96 NX 2.0L SR20DE DOHC

91-96 NX-R 2.0L SR20DE DOHC
91-95 Pulsar N14 2.0L SR20DE DOHC
95 on Pulsar N15 2.0L SR20DE DOHC
93-98 Skyline R33 2.5L RB25DET

Brand NewOnly $69 incl. P&H (+$3 optional insurance) SAU special

BUY_BUTTON.gif

* We also stock NEO R34 unit - DIRECT-FIT *


OXY_SKYLINE_350.jpg

Universal 1 2 3 and 4 wire O2 sensor's also available in store today!

Link to comment
Share on other sites

  • 2 weeks later...
  • 3 weeks later...
  • 2 months later...

PEC Australia Oxygen Sensor

Direct-fit 3 wire

*NGK OZA395-E2 equivalent*

91-96 NX 2.0L SR20DE DOHC

91-96 NX-R 2.0L SR20DE DOHC

91-95 Pulsar N14 2.0L SR20DE DOHC

95 on Pulsar N15 2.0L SR20DE DOHC

93-98 Skyline R33 2.5L RB25DET

Brand New Only $69 incl. P&H (SAU special)

OXY_SKYLINE_350.jpg

Universal 1 2 3 and 4 wire O2 sensors also available in store today!

After having bought one of these for my R33 GTS25t and fitting it a few weeks ago, I thought I might share some Economy Results.

(Before New O2)

45.0L / 300km=15.00L / 100km

(After New O2)

47.0L / 360km=13.00L / 100km

47.0L / 400km=11.75L / 100km

44.5L / 391km=11.38L / 100km

46.0L / 392km=11.73L / 100km

44.0L / 336km=13.10L / 100km

48.0L / 374km=12.83L / 100km

46.7L / 386km=12.10L / 100km

45.7L / 374km=12.22L / 100km

BINGO!!! Ladies and Gentlemen... I Think we have a Winner!

:cheers:

Edited by Not a Pulsar
Link to comment
Share on other sites

  • 4 weeks later...

I got one of these directly from PECAus, fuel economy and also engine idle seems to be so much better than the old O2 sensor. Though it didn't have direct replacement, I had to put off the old plug and crimp them to the new sensor, wasn't difficult but it's worth your money! Cheaper than paying hundreds for a silly sensor.

Link to comment
Share on other sites

I got one of these directly from PECAus, fuel economy and also engine idle seems to be so much better than the old O2 sensor. Though it didn't have direct replacement, I had to put off the old plug and crimp them to the new sensor, wasn't difficult but it's worth your money! Cheaper than paying hundreds for a silly sensor.

Hi mate,

Thanks for the great feedback!

What Skyline did this go onto as it should be a bolt on for the RB25DET R33.

- Brendan

Link to comment
Share on other sites

  • 2 months later...
 Share




  • Similar Content

  • Latest Posts

    • Personally, i'd be dropping the extra $400 for the Pro series. I believe (at least during their original conception) they were based off the Blue series but have evolved with apparent new valving tech etc etc.  The BC's were super harsh ride wise, felt like the road was covered in potholes almost (this with damping at softest), but they did feel a bit more pointy initially through corners, i felt like there was considerably more understeer at turn in on tighter radius corners (but this is not really a like or like, considering the difference in wheel size, tyre choice, track temp etc etc) 
    • Facts but it's okay I've ordered a new ignitor based on GTSBoy's confidence. In the meantime I did the ole jiggle tap on the maf connector with no change. Seems like the warmer it gets outside the worse the issues get. Hoping it's the ignitor. Also going to pick up some carb cleaner and try to get that iacv cleaned out real good. I'll report back once I've gathered more data. I really appreciate the feedback though guys keep it coming. Trying to learn everything I can about this car want to keep this thing for a long time.
    • Unfortunately this is a bit like arguing if you prefer blondes or brunettes....you will get people who strongly hold either view. My observation is I have had good results racing on MCA golds (spring led) but personally find Gary's approach of lighter springs and heavier bars is more predictable over mixed or rough surfaces like in rally (or an Australian road)
    • Yeah, they mentioned that its not worth upgrading from the stock sway bar due to how their coilovers are set up.  Still learning more about the suspension etc, but with Garys approach of lower spring rates and controlling roll with bars and obviously improved dampers, wouldnt that be like softer ride and more roll but with the sway bar, it keeps the roll to a minimum/lower amount? Where as MCA's approach of stronger springs, and dampers adjusted for the springs, wouldnt that be a harder ride (against bumps, going straight etc) and less roll, and the stock sway bar does its thing but the coilovers does the majority of the work? Its a daily so im in favor of a softer ride while normally driving but keeping the roll to a minimum while turning etc. Or am I getting my idea of suspension completely wrong?   I was looking at the Pro Comfort, it has the price hike of it being the MCA Pro series ( extra $400, total $2490 ). Ive read people saying the blue/red/gold series(and the blues being more favorable from the past threads) but what would those be nowadays?  What was the drive difference between the BC golds and the MCA Blues you got?
    • more then likely but not very practical for a street car 
×
×
  • Create New...