Jump to content
SAU Community

S A U N S W - Wakefield Trackday Number 2 For 2011


N1GTR
 Share

Recommended Posts

IMG-4055.jpg

Hey all,

Wakefield Park doesnt need much of an introduction to most of you, to anyone thats never heard of Wakefield Park this is a very safe track about 2 hours from Sydney where you can drive your pride and joy as fast as you like with safe run off areas and no speed cameras to worry about!

This day is being run in conjunction with the Rotary club (RENEW) who we did trackdays with quite a long time ago aswel as recently in March, RENEW have 24 spaces and we have 24 spaces.

If you've never driven on a track before and want someone experienced to give you instruction and help with how to drive better, faster or safer, or even if you've done a couple of trackdays and just want to ask some questions (no matter how silly they may seem) we have this at no extra charge available throughout the day.

For the trackday regulars we have a friendly interclub challenge between us and the RENEW club. THIS IS NOT COMPULSORY!

Ok so here's the details;

Date: 28th May 2011

Where: Wakefield Park (www.wakefieldpark.com.au for directions)

Who: Anyone with any car (doesnt have to be a Skyline)

What: Trackday, suits total beginner to advanced

What time should I get there: 8am at Scruitineering for experienced, 730am for beginners (Scruit finishes at 840am sharp, if you're late you need to wait until the day has started so the rest of the group isnt held up)

How much: SAUNSW and RENEW members $210 per driver, non members of those clubs $250 per driver

Lap timing: Included

Passengers: Allowed, must wear helmet and same clothing as drivers aswel as sign an indemnity form and pay a small fee

Licence needed: CAMS L2S or AASA club licence ($50 for 12 months, yes you can arrange this on the day no worries)

How the day runs;

Firstly, when you arrive at the track, find a place to park and empty all loose objects out of the car. Ensure there's nothing loose in the engine bay and no leaks (More info on scruitineering will be posted up at a later time). Then drive your car to the scruitineering shed (its marked, but if you dont know where it is, follow where everyone else goes or just ask someone, its very easy to find, directly on the left as you enter from the highway). Your car will be checked to make sure its safe to go on the track and it will then be assigned a number which is your number for the day. You then park the car back in your original spot and go to the office to sign on. Take your licence with you or if you dont have one, this is where you can get one. Once you've signed on its now time to wait for the drivers brief to begin (which will be announced on the loud speakers throughout the pits and starts at 845am sharp). Once the drivers brief is over, all the drivers are split into groups based on experience so that everyone is comfortable in their group. One group is then allowed on the track at one time for evenly timed sessions, once one group comes off, another goes on, this repeats until the end of the day with a short break around lunch so officials and helpers can get some food and drinks.

Differences for this day;

-Fire extinguishers are mandatory, must have the Australian Standards sticker, be full, mounted securly and somewhere in the cabin

-Metal valve caps on all wheels, dont stress over this, they will be supplied and fitted at scruitineering

Thats basically it! The only way to secure a spot is through sending in an entry form and payment to the RENEW account. The very basic entry form is attached to this post and the bank details are below;

RENEW bank details:

Bank - CBA

Account name - Rotary Enthusiasts of NSW

BSB - 062 272

Account number - 10106600

Please put your LAST NAME in the description, eg "SMITH"

See you at the track :D

-Steve

SAUNSW President

Entry Form SAUNSW + RENEW Wakefield 28th May 2011.pdf

Supp regs SAUNSW + RENEW Wakefield 28th May 2011.pdf

Link to comment
Share on other sites

  • Replies 204
  • Created
  • Last Reply

Top Posters In This Topic

Entrants List:

1. Michael Hill

2. John Sykes

3. Andrew Trieu

4. Mark Robinson

5. Brian Bugh

6. Nathan Dean

7. Mike Bennett

8. Scott Bunny

9. James Westhorp

10. Ben Martin

11. Trent Kennedy

12. John Penlington

13. Ben Kerker

14. Anthony McAlpine

15. Ron Lea

16. Greg Boyle

17. Nick Barker

18. Reece McIntosh

19. Andrew Middlebrook

20. Daniel Haysom

21. Josiah Haysom

22.

23.

24.

RESERVE

1.

2.

3.

4.

5.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share




  • Similar Content

  • Latest Posts

    • Haven't updated this is a while. -5 speed conversion is done. Then center console, parking brake handle, and mounting bracket can be adapted from a R34 since the S2 parts are all disco. Console is a slightly different grain pattern and color but works fine. R33/ R34 GTS (no booster) clutch pedal works as well as the matching master cylinder. Wiring is simple, jump the starter connector at the fuse box, note which wires are connected at which position on the auto neutral safety switch and cut off the switch harness and connect to the corresponding switch on the 5 speed. -Rear R34 rear subframe swap is completed. Full Nismo arm set, 2-way LSD set up soft, 322mm Brembo brakes, Ohlins Flag-R coil overs (need to drop the spring rate 1Kg) -RB swap is under way. HKS Step 2 High Response 2.8 BCD stroker kit / Step 2 V-Cam / GTIII 4R Kit I may not use the 4R kit but not sure yet as I've seen some pretty decent dyno sheets on it and it doesn't spool as slow as people think when you have v-cam. I have the wiring manual for the car and a spare 260RS harness so the wiring shouldn't be that bad but I just haven't had the time to invest in it. If anyone has a suggestion for someone who can handle it let me know! I have a bunch of spare 5mt swap parts and some Nismo 580 turbos if anyone needs/wants them hit me up. Located in California but willing to ship. As always, thanks to all the members who have answered my questions and helped this project keep moving!      
    • Did Car Inspect get back to you? How bad was the actual "structural" damage? What front surgery was required?
    • I would be, however the last PS I owned was a PS1 and the last GT I played was GT1 lol. Also, how do you dads even have time to do anything? I barely have time to even sleep 7 hours a night!
    • I was thinking of setting up a multiplayer comp. Just a series that anybody could join and we could run a table here.  Anybody interested in that?
    • Thanks - to be sure will the WHC34 work?  I can’t find the other one anywhere.  Thanks 
×
×
  • Create New...