Jump to content
SAU Community

Fs: Nissan Pintara Trx Sr20det


Recommended Posts

Hey Guys,

For sale due to financial reasons is my 1990 Nissan Pintara powered by the well known SR20DET.

List of things:

- Manual with Modded short shifter

- Customer Front mount set up with Atmo BOV

- No stereo in sight

- Full 3" Exhaust

- Whiteline swaybars (inc oversize rear)

- Shaved Passenger Door and Boot locks. Red, paint in average condition. Panels are good n straight. SSS Grille.

- 20% Tint in fairly good cond

- Alarm

- SR20DET Conversion, stock gearbox with SR20 Bellhousing

- Microtech MT8 ECU

- R32 GTR Seats trimmed in maroon vinyl

- Electric Windows, Mirrors retrofitted (Ghia electrics), Full Central Locking

- Red dash mod

- KMs on engine around the 150 mark

- Nismo / Enkei 15" wheels with 205 tyres

- NSW Rego fresh 12 months

- Engineered, with certificate

Interior is in a few pieces as i had to rewire the Microtech as whoever installed it did a shocking job. Rear seats are also out currently as i just changed the fuel pump.

Anything else please ask I have missed a bunch.

Car comes with few spare parts, including a set of stock trx wheeels.

I'm asking $5,000, Or $10,000 with free project car lol. Which comes with a garage full of spares.

PM or get me on 0454 193 766

Cheers

Nathan

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • I think the pic in the first post is another car, and post 7 is OP's car with standard arms and swaybar swaybar swaybar. I can't tell what brand the silver coilovers are, and even if I could I don't know whether the spring rate is OK, if you can find a brand on the shocks and numbers on the springs that might help. Also, if you can measure the ride height from centre of your wheel to the guard that will help with advice too as handling suffers if ride height is too low
    • sadly, pics no work. that car must have spent a lot of time in a cryo bubble
    • In the first photo you posted, the colour of the control arms are the signature colour for Ikeya. Same for the swaybar, signature colour for Whiteline.  I like Hardrace, they also do hardened rubber bushes if your car is mainly a street car.  I like GKTech as well, but they use a lot of rose joints in their stuff so might not be the best choice for everyone.  The system might have been good back in its day, but it's a prehistoric system now. I suspect that most people have removed the HICAS as they want the car to do what they want to do, not what the car wants to do. From what I also understand, it isn't consistent in it's behaviour on track so it's hard to trust the car/know where its absolute limits are for track use.  Having said that, I think the HICAS eliminator kit was the first thing I installed when I bought my car. I don't personally have any experience with the HICAS system on a race track.  
    • Thanks for the info. Didn’t know I had aftermarket control arms already? Will talk to my garage. What brand would u recommend if I want to play around with my camber more? I would think my camber is around stock level right now or more negative now due to lowering with coilovers. I will be lower her again 1.5 cm to get some more.    also why does everyone like to remove the hicas system? Is it because most don’t work properly anymore or ppl just don’t like them. Mine is functioning as it should be right now.    thanks for the good info 
    • It looks like you've got Ikeya control arms and an aftermarket sway bar, maybe whiteline?  Or am I just going crazy? lol Unfortunately it won't, but what it will do is look really pretty. That's about all unfortunately.  How much neg camber do you currently have? Generally lowing the car dials in quite a bit of neg camber as it is. If you do go down this path, your best bet is get adjustable arms, toe arms (or preferably a good HICAS elimination kit) and traction rods. With all 3 being adjustable, you'll be able to dial out any bump steer that is introduced by playing with the camber settings. 
×
×
  • Create New...