Adjustable Upper Arms - Problem R32 Gtr

[GTR32GUS]

Yeah I had the same problem , I just got a hammer and where it was rubbing bashed it in , mine were only just touching

[ERR33T]

hey guys just a quick question....... if my front tyres are wearing on the inside wot would i need to fix this problem i got camber hard if u can help me just email me [email protected]

Edited June 12, 2007 by ERR33T

[Sydneykid]

Yep i checked the fitting guide and there is only one way they can fit with the adjusters on the top.

Ride height is 355ish and the castor rods are standard.

They are offset like the standard arms, you can see that the top pic is the RHS and the second pic is the LHS. In the LHS pic you can see the offset bit in the top right of the pic

Yep it was done on an alignment machine. It may have slipped though if they weren't done up tight enough - It's getting towed to the workshop tomorrow so hopefully can sort it out.

Many thanks everyone for the replies, keep them coming!

The only thing that I can see that is different to the normal is "the castor rods are standard", I assume that means the bushes are standard as well. ALL GTR's have (need) more caster, which reduces the negative camber, so the upper arms have to be shorter than yours to achieve reasonable negative camber. If you haven't already added some caster, then that may remove the problem.

cheers

[Ronin 09]

thanks SK, adjustable castor rods are going in on Tuesday... hopefully should sort it out!