I'm sacking the nissan projectors and retro-ing some Honda Euro HID projectors in... they're a bitch to do...

If anyone is interested, will post up some pics as I go.

Got the headlight apart at the moment, done some cutting of the euro HID projector and that's about it

Register on the forums for fewer ads.

Headlight apart (sorry no glass pics):


Chrome headlight cover (being sprayed matte black)


Standard projector on left, Honda Euro on right (already cut an 'ear' off it)


As you can the Honda projector is shorter, and mounts further forward. Will have to fabricate a bracket for it to fit the standard adjusters... (in progress)

Cutting ears off Euro projector








Because the new projector sits so far forward in the assembly, i may have to cut the rear of the housing off and move it further back. If that's the case I'll plastic weld on a bit of PVC pipe with a press-fit lid on the back. Also, I need more diameter than the standard rear cap to get my fingers in to get the bulb out


I'm moving REALLY slow with this and probably won't get it done until xmas... so stay tuned

Update
Inspiration struck... here is the old projector


Another view


disassembled


So i cut off the front lens side, so i can use the existing mount points, and just bond in the new projector


Trial fit is there nothing masking tape can't do??


back side


Trial fit again... stock you say...


Original...


New xenon trial fit


Bored yet?? ...To be continued
oh and to fit the xenon i had to cut the other side of the xenon light too

I've decided to do a white 6-LED swap into the parkers too... we'll see how that goes :|

small DIY I made for taking the glass off, which you'll need to do for this mod:
http://www.skylinesaustralia.com/forums/in...showtopic=53353

Couple of questions:
Where'd you get the Honda Euro projectors from, how much, and do they come with the Xenons and ballasts etc?
And... have you test run the light to see if the throw is any better than the standard projector?

Funkey, the oven method works very well to get these apart... preheat oven to 180C, turn OFF oven, put headlight in for 10 mins and pry apart

The Euro projectors I bought off a wreck... $250 (!) for the pair. I had to ebay some ballasts and globes.

I have a couple more sets of Euro projectors only, that (when i get off my ass) will post on Ebay... unless anyone here wants them.

Will also be making a wiring harness that uses relays, and allows the lows to stay on when the highs are switched on... my harness also will ensure that when you just flash someone without the parkers etc on, only the highs will flash.

Done a test - if you've ever seen a Honda euro HID you'll see that the cut off is PERFECT (no glare at all) and no hot spots etc.

IMO, it is one of the BEST non-bixenons out there

Good on you Ronin that looks like a professional start. The planned loom and things are definately very professional.

I reckon before you set the actual projector please just blue tac it and actually turn it on so you make sure the focus point is throwing the light properly past the enclosure (headlight assembly). Unless off course you've measured where the honda projector sits in relation to the honda light assembly already.

Looks like a great project, if you're in Sydney and ever on a cruise I'd like to check em out.

Don't know about the led swap. I've been thinking of a led swap on the rear of my cefiro but since I'm selling it can't be bothered.

For the price of $250 and getting some extra bulbs and ballasts you'll have a great retro there - the honda xenons are very damn good and probably quite a bit cheaper than the audis.

What bulb connector are they for ?

Love your work Marcus. Once you're done, could you summarise the time/effort involved please mate? Cause it looks the business and I'm dead keen to follow up.

ps I picked the car up a few weeks ago, looks great. No cam, so no pics Is yours finished?

well.. its funny i see this thread today... I was at the car wash today and i did the motor and some green shit went into the headlights..

NOOOOO, so i pulled one apart and did it gold..
need advice? or should i go BLACK????



OR maybe even gold chrome?? do places do that?

I'm wondering if i can do a conversion for a R33. I love projector headlights, but i can't seem to find any aftermarket ones. GTRs lights are too expensive too. So any suggestions ?

any one got any R32 standard type 2 headlights for sale???
the first one worked out, but the 2nd one while in the oven to seal up.. i cooked it, lol the whole of the bottom melted off...

DAMMMMM ITTTTTT

someonestolecc - the bulbs are xenon specific designation; they're D2S globes.

Mark - I'm going to need pics mine's still a fair way off gives me more time to play with other stuff though. I'll give a final run down of time / cost when I'm done. They're going to be expensive though - partial summary
HID projectors - $250
headlights (if you get another pair) - $250
Ballasts / globes - $300
various bits for wiring harness - $80
various bits from bunnings (paint, dremel stuff, silicone etc) - $120
Is it worth it? probably not. Is it trick? I think so.

kezza... oh no!
I've done a step by step for opening them below:
1. preheat oven (mine's fan force) to 180C. NB - leave the tray that you're going to bake the headlight on OUT OF THE OVEN. Bakey goodness:



2. SWITCH THE OVEN OFF! Place headlight and tray into oven for ~10mins... will vary at bit between 8 and 12 mins.



3. Pull the headlight out of the oven (wear gloves if you're a sissy like me). Get a screwdriver (not a good one because goop will stick and is a bitch to get off) and pry off one corner between the glass and the housing. If it's sufficiently hot it, once you get one edge apart it will be simply a matter of grabbing the two halves and pulling! voila! open headlight



So there it is complete with girlies on the newspaper
will probably not get time to work on this for a few weeks, but will keep updating this thread
Are we bored yet?

haha fan forced hey.. lol mine had the big red bar down the bottom,(old school) doesnt matter, i fixed the melties with sicka flex to keep out the shit. im just glad it didnt stuff the internals!