Yes I know this is rare as hens teeth and will probably cost drug money, but does anyone have one for sale? Ive got a reasonable budget for one, so fire away. If nothing in 6 weeks then plasmaman it is.

Steve

Register on the forums for fewer ads.

first place would be www.r30.co.jp if you can talk to them they might be able to hook you up or even get you a unicorn.. fj24 stroker kit ummmm

maybe even r31house as they have a DR30 now and might know about something.

r30 have nothing

Ill try the local R31 house agent now.

Thanks champ.

www.powerplayimports.com.au i think is the aus rep for r31house

No the first place you could ask is me .

Which FJ20 inlet manifold do you want as there are two DR30 variations and the S12 Gazell type .
The one I used in the Bluebird I had 4 cars ago was the slightly larger plenum volume early version . I removed the external EGR log from the lower side of the runners and the throttlebody flange was removed and welded back on at a better angle for the old birds intercooler plumbing .

I have all three and their native fuel rails and FPR's from memory so drop us a PM and make an offer .

In Syd , cheers A .

BTW still have all sorts of FJ20 odds and endz looking for new homes ie Gazell engine mount brackets (v hard to find nowdays) Gazelle thermo housing , loom, Gazelle turbo exhaust manifold and cast dump pipe (no fire wall mods) and these dumps have the waste gate integrated unlike the DR30's extra flapper plate and small bore bolt on elbow , intercooled DR30 ECU , odds and endz .

Maybe I should of wrote JUN in capitals. This is the plenum I'm chasing. If I dont locate on in 2-3 weeks, ill be placing my order with plasmaman.



Steve

Can i ask why you want an aftermarket plenum????
Ben Diggles run 9.1 at 150+mph with a nissan intake manifold.
How much power do you want to make

There is a lot of miss information about inlet manifolds and in this case the std DR30 manifold is not as bad as many think .

The ultimate system is individual throttlebodies and is why Nissan used them on RB26's and the GTiR spec SR20 .
Still while the Japs race 9-11000 rpm drag engines the copy cats think its the way to go .

A .

Actually thats only partially true, the RB26 was designed to compete in the up to 4500cc touring car class.
And as such was a curcuit car engine firstly.
ITB's give better response,not necessarily more power.
I guess it depends on exactly what you are trying to make.
A drag car would want 1 large t/b over itb's.
The other way around for raod/track car.